Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: ROB PAUL

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROB PAUL in 509 S STATE STREET, CHILTON, WI 53014 (NAICS 238160). OSHA activity number 343587317.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ROB Paul for free Get an email when a new federal OSHA severe-injury report for ROB Paul is published. One employer, no account, unsubscribe in one click.
Establishment
ROB PAUL
Site address
509 S STATE STREET
City
CHILTON
State
WI
ZIP
53014
Mailing
E1321 OLD SETTLERS ROAD, DENMARK, WI 54208
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.501 B13

Serious Gravity 10 3 instances 2 exposed
Issued
Dec 28, 2018
Penalty
Initial $3,880 · Current $1,940 Reduced
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system.    a)  On November 7, 2018 at 509 State Street in Chilton, employees were working on a steep slope roof surface twenty-two feet above surface level without utilizing fall protection equipment; removing roofing materials from main roof surface.    b)  On November 7, 2018 at 509 State Street in Chilton, employees were walking on a low slope roof surface twelve feet above surface level without utilizing fall protection equipment; access/egress house addition's roof surface.    c)  On November 7, 2018 at 509 State Street in Chilton, employees were walking on a steep slope roof surface eight feet above a low slope roof surface without utilizing fall protection equipment; access/egress to main roof work area.
Recent events (2)
  • · I (S) $1940
  • · Z (S) $3880

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 28, 2018
Penalty
Initial $2,217 · Current $1,109 Reduced
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grab-rail, shall be provided to assist employees in mounting and dismounting the ladder.    On November 7, 2018 at 509 State Street in Chilton, employees were using a portable ladder to access/egress a roof surface eight feet above a lower roof surface without grab-rails extending three feet above the upper roof edge and without the ladder secured.
Recent events (2)
  • · I (S) $1108.5
  • · Z (S) $2217

1926.503 A02 III

Other-than-serious 1 instance 2 exposed
Issued
Dec 28, 2018
Abate by
Mar 29, 2019
Penalty
Initial $311 · Current $156 Reduced
29 CFR 1926.503(a)(2)(iii):  The employer shall assure that each employee has been trained, as necessary, by a competent person qualified in the use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used.    On November 7, 2018 at 509 State Street in Chilton, the employer did not provide required fall protection safety training for employees who did not associate fall from elevation hazards when using a ladder on a roof surface to access an upper roof surface without grab-rails extending three feet above the landing surface and when walking on a low slope roof surface as part of an access/egress route with unprotected edges and walking/working on a steep slope roof surface with unprotected edges without utilizing fall protection equipment.
Recent events (2)
  • · I (O) $155.5
  • · Z (O) $311

1926.503 B01

Other-than-serious 1 instance 2 exposed
Issued
Dec 28, 2018
Abate by
Mar 29, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1): The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training.    On November 7, 2018 at 509 State Street in Chilton, the employer did not provide written employee fall protection safety training certification for employees walking/working from roof surfaces at heights greater than six feet.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343587317.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.