Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ACE IRON & METALS, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ACE IRON & METALS, INC. in 10 INDUSTRY AVE., JOLIET, IL 60435 (NAICS 238910). OSHA activity number 343596417.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ACE Iron & Metals, INC. — free Get an email when a new federal OSHA severe-injury report for ACE Iron & Metals, INC. is published. One employer, no account, unsubscribe in one click.
Site address
10 INDUSTRY AVE.
City
JOLIET
State
IL
ZIP
60435
Mailing
11 THIRD AVE., JOLIET, IL 60433
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
2
Ownership type
A

7 citations on file for this inspection.

1926.20 B01

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 24, 2019
Abate by
Feb 20, 2019
Penalty
Initial $2,273 · Current $1,592 Reduced
29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part.     a. On or about November 10, 2018, at the above addressed jobsite, the employer did not maintain an accident prevention program to comply with the regulations of this part which included, but were not limited to employee protection when exposed to hazards related to demolition activities.
Recent events (2)
  • — I (S) $1592
  • — Z (S) $2273

1926.21 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 24, 2019
Abate by
Feb 20, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:  a.  On or about November 10, 2018, at the above addressed jobsite, an employee was not trained in the recognition of jobsite hazards, which included but not limited to, fall hazards, aerial lifts operations, and fire hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.20 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 24, 2019
Abate by
Jan 30, 2019
Penalty
Initial $3,031 · Current $0 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s).    a.  On or about November 10, 2018, at the above addressed jobsite, an inspection was not conducted by a competent person  capable of correcting hazards such as falls or fire, which could result in employee injuries.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3031

1926.24

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 24, 2019
Abate by
Feb 20, 2019
Penalty
Initial $2,273 · Current $0 Reduced
29 CFR 1926.24: The employer did not develop and/or maintain an effective fire protection and   prevention program at the job site throughout all phases of the construction, repair, alteration or   demolition work and/or did not ensure the availability of the fire protection and suppression equipment   required by Subpart F of this part:     a. On or about November 10, 2018, at the above addressed jobsite, the employer did not develop or maintain a fire protection and prevention program for employees engaged in demolition activities.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2273

1926.352 E

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 24, 2019
Abate by
Jan 30, 2019
Penalty
Initial $5,304 · Current $3,713 Reduced
29 CFR 1926.352(e): Additional fire prevention precautions were not provided when welding, cutting, or heating operations were such that normal fire prevention precautions were not sufficient:    a. On or before November 10, 2018, at the addressed jobsite, an employee performing demolition activities using a cutting torch on a vessel was not provided with a fire watch, thereby exposing the employee to burns.
Recent events (2)
  • — I (S) $3713
  • — Z (S) $5304

1926.453 B02 V

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 24, 2019
Abate by
Jan 30, 2019
Penalty
Initial $5,304 · Current $3,713 Reduced
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:Note:  As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system.  The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated under 1926.502(e).    a.  On or about November 10, 2018, at the above addressed jobsite, an employee performing demolition operations from a JLG aerial lift, approximately thirty (30) feet above the ground, was not wearing full body harnesses, thereby exposing the employee to falls.
Recent events (2)
  • — I (S) $3713
  • — Z (S) $5304

1926.850 A

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 24, 2019
Abate by
Feb 20, 2019
Penalty
Initial $2,273 · Current $1,590 Reduced
29 CFR 1926.850(a): An engineering survey was not performed by a competent person to determine the conditions of the framing floors and walls and the possibility of unplanned collapse of any portion of the structure prior to permitting employees to start demolition operations.    a. On or about November 10, 2018, at the above addressed jobsite, an engineering survey was not performed by a competent person prior to the start of demolition activities.
Recent events (2)
  • — I (S) $1590
  • — Z (S) $2273

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343596417.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.