ENGLEWOOD, CO ·
OSHA Inspection: BURWELL INDUSTRIES INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BURWELL INDUSTRIES INC. in 17 INVERNESS WAY EAST, ENGLEWOOD, CO 80112 (NAICS 446120). OSHA activity number 343596698.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BURWELL INDUSTRIES INC.
- Site address
- 17 INVERNESS WAY EAST
- City
- ENGLEWOOD
- State
- CO
- ZIP
- 80112
- Mailing
- 6890 S EMPORIA ST, CENTENNIAL, CO 80112
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 446120
- Employees
- 14
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.213 C01
- Issued
- Dec 12, 2018
- Abate by
- Dec 18, 2018
- Penalty
- Initial $9,054 · Current $7,761 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) On or about November 13, 2018, and at times prior, employees in the shop were exposed to amputation hazards where the Delta X5 Unisaw did not have an adjusting hood guard in place over the blade.
Recent events (2)
- · I (S) $7761
- · Z (S) $9054
1910.213 C02
- Issued
- Dec 12, 2018
- Abate by
- Dec 18, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) On or about November 13, 2018, and at times prior, employees in the shop were exposed to amputation hazards where the Delta X5 Unisaw was not equipped with a spreader.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C03
- Issued
- Dec 12, 2018
- Abate by
- Dec 18, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about November 13, and at times prior, employees in the shop were exposed to amputation hazards where the Delta X5 Unisaw was not equipped with kickback fingers or dogs.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1904.39 A02
- Issued
- Dec 12, 2018
- Penalty
- Initial $6,467 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: a) On or about November 6, 2018, a workplace accident resulted in an employee suffering an amputation. The employer did not report the incident to OSHA until November 9, 2018.
Recent events (2)
- · I (O) $0
- · Z (O) $6467
More inspections at Burwell Industries INC.
View Burwell Industries INC.'s full OSHA safety record →
More inspections in this industry (NAICS 446120)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343596698.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.