Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ATLANTIC STRUCTURES CONCRETE, INC

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of ATLANTIC STRUCTURES CONCRETE, INC in 56 - 58 ELM ST., NEWARK, NJ 07105 (NAICS 238110). OSHA activity number 343596821.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Atlantic Structures Concrete, INC — free Get an email when a new federal OSHA severe-injury report for Atlantic Structures Concrete, INC is published. One employer, no account, unsubscribe in one click.
Site address
56 - 58 ELM ST.
City
NEWARK
State
NJ
ZIP
07105
Mailing
287 WALNUT ST- 1ST FL, NEWARK, NJ 07105
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238110
Employees
2
Ownership type
A

4 citations on file for this inspection.

1926.1153 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 6, 2018
Penalty
Initial $2,772 · Current $1,386 Reduced

Hazardous substances 9000

29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.    a) Worksite, 56 - 58 Elm Street, Newark, NJ    An employee  saw cut approximately four (4) concrete balconies using a gasoline powered Stihl Masonry saw  without  engineering controls such as a continuous water spray required by Table 1.     Violation occurred on or around November 9, 2018
Recent events (3)
  • — F (S) $1386
  • — C (S) $2772
  • — Z (S) $2772

1926.1153 D02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 6, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a) Worksite, 56 - 58 Elm Street, Newark, NJ  The employer did not assess employee exposure to respirable crystalline silica during saw cutting of  approximately four (4) concrete balconies without using engineering controls such as a continuous water spray required by Table 1.  Violation occurred on or around November 9, 2018
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.1153 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 6, 2018
Penalty
Initial $2,772 · Current $1,386 Reduced

Hazardous substances 9000

29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan:      a) Worksite, 56 - 58 Elm Street, Newark, NJ    The employer did not establish and implement a written exposure control plan for an employee exposed to silica  while saw cutting approximately four (4) concrete balconies.     Violation occurred on or around November 9, 2018
Recent events (3)
  • — F (S) $1386
  • — C (S) $2772
  • — Z (S) $2772

1926.1153 G04

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 6, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR 1926.1153(g)(4): The employer did not designate a competent person to make frequent and regular inspections of job sites, materials, and equipment to implement the written exposure control plan:  a) Worksite, 56 - 58 Elm Street, Newark, NJ  The employer did not designate a competent person to implement a crystalline silica exposure control plan for an employee exposed to silica while saw cutting approximately four (4) concrete balconies.     Violation occurred on or around November 9, 2018
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

View Atlantic Structures Concrete, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343596821.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.