Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FIRST CHOICE CONSTRUCTION

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of FIRST CHOICE CONSTRUCTION in 1514 E SEALY, MONAHANS, TX 79756 (NAICS 238120). OSHA activity number 343601860.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch First Choice Construction — free Get an email when a new federal OSHA severe-injury report for First Choice Construction is published. One employer, no account, unsubscribe in one click.
Site address
1514 E SEALY
City
MONAHANS
State
TX
ZIP
79756
Mailing
P.O. BOX 1558, SEMINOLE, TX 79360
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
8
Ownership type
A

4 citations on file for this inspection.

1926.501 B10

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 29, 2019
Abate by
Feb 19, 2019
Penalty
Initial $3,410 · Current $2,046 Reduced
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system.  On or about 8 November 2018 the employer allowed employees to  work on the roof of a structure more than six feet above the next lowest surface without adequate fall protection
Recent events (2)
  • — I (S) $2046
  • — Z (S) $3410

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 29, 2019
Abate by
Feb 19, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  On or about 8 November 2018 the employer allowed employees to use a work on the roof of a structure more than six feet above the next lowest surface without adequate fall protection training
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 29, 2019
Abate by
Feb 19, 2019
Penalty
Initial $3,410 · Current $2,046 Reduced
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a Powered Industrial Truck. AND AS REFERENCED BY THE NOTE CONTAINED IN 1926.602(d)"   On or about 8 November 2018 the employer allowed employees to operate a Powered Industrial Truck to lift materials to the roof a structure without adequate Powered Industrial Truck  training
Recent events (2)
  • — I (S) $2046
  • — Z (S) $3410

1926.602 C01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 29, 2019
Abate by
Feb 19, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were  made without the manufacturer's written approval:Note:  If such modifications or changes were made, the capacity, operation, and maintenance instruction plates, tags, or decals should have been changed accordingly.  In alternative:  29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval   On or about 8 November 2018 the employer allowed employees to use a Powered Industrial Truck that had a basket Approximately 20 feet long without approval or certification of the combination by an approved authority
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View First Choice Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343601860.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.