Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARKINGS INC.

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of MARKINGS INC. in I 90 WB MM 17.2, BECKET, MA 01223 (NAICS 238990). OSHA activity number 343604450.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Markings INC. — free Get an email when a new federal OSHA severe-injury report for Markings INC. is published. One employer, no account, unsubscribe in one click.
Establishment
MARKINGS INC.
Site address
I 90 WB MM 17.2
City
BECKET
State
MA
ZIP
01223
Mailing
30 RIVERSIDE DR., PEMBROKE, MA 02359
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238990
Employees
15
Ownership type
A

3 citations on file for this inspection.

1926.20 B02

Serious Gravity 10 1 instance 12 exposed
Issued
May 10, 2019
Abate by
May 30, 2019
Penalty
Initial $5,304 · Current $6,365
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s)    I90 WB Beckett, MA: On or about November 15, 2018 the employer had not initiated and maintained programs which provided for frequent and regular inspections of the job sites, materials and equipment by a competent person such as but not limited to frequent inspections of Fleet vehicles to ensure daily vehicle inspections were examined for accuracy and completeness.    Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1). 29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:    I90 WB Beckett, MA: On or about November 15, 2018 the employer had not instructed each employee in the recognition and avoidance of unsafe conditions and regulations applicable to his\her work environment such as but limited to the control and elimination of back over and struck-by hazards inside roadway work zones.    Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
  • — I (S) $6364.8
  • — Z (S) $5304

1926.601 B04 I

Serious Gravity 10 3 instances 12 exposed
Issued
May 10, 2019
Abate by
May 22, 2019
Penalty
Initial $5,304 · Current $6,365
29 CFR 1926.601(b)(4)(i): The employer had in use motor vehicle equipment having an obstructed view to the rear which did not have a reverse signal alarm audible above the surrounding noise level:     I90 Westbound, Becket, MA MM17.2: On or about November 15, 2018 the employer had in use a line grinder truck which had an obstructed view to the rear and the reverse signal alarm was not audible above the surrounding noise level.    a) Reverse signal alarm was not audible above surrounding sound.  b) Reverse signal alarm was intermittent.  c) Manual alarm was not connected to reverse signal.    Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
  • — I (S) $6364.8
  • — Z (S) $5304

1926.601 B14

Serious Gravity 10 1 instance 12 exposed
Issued
May 10, 2019
Penalty
Initial $5,304 · Current $0 Reduced
29 CFR 1926.601(b)(14): All defects were not corrected before motor vehicle(s) were placed in service:      I90 Westbound, Becket, MA MM17.2: On or about November 15, 2018 the employer had in use a line grinder truck which had defects that included but were not limited to non-functioning back up lights, leaking brake air lines, and an internment reverse signal alarm that were not corrected prior to placing such vehicle into service.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5304

View Markings INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343604450.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.