CUDDY, PA ·
OSHA Inspection: EDWIN BELL COOPERAGE COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EDWIN BELL COOPERAGE COMPANY in 697 MILLER RUN ROAD P.O. BOX 294, CUDDY, PA 15031 (NAICS 322211). OSHA activity number 343605374.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EDWIN BELL COOPERAGE COMPANY
- Site address
- 697 MILLER RUN ROAD P.O. BOX 294
- City
- CUDDY
- State
- PA
- ZIP
- 15031
- Mailing
- 697 MILLER RUN ROAD P.O. BOX 294, CUDDY, PA 15031
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322211
- Employees
- 38
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.215 B09
- Issued
- Jan 25, 2019
- Penalty
- Initial $3,978 · Current $2,300 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: (a) Maintenance Area- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018, the distance between the abrasive wheel and the adjustable tongue on the Central Machinery 6" Bench Grinder exceeded one-fourth inch.
Recent events (2)
- · I (S) $2300
- · Z (S) $3978
1910.215 A04
- Issued
- Jan 25, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch. (a) Maintenance Area- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018, the work rests on the Central Machinery 6" Bench Grinder exceeded one eighth inch.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.212 A01
- Issued
- Jan 25, 2019
- Abate by
- Apr 1, 2019
- Penalty
- Initial $6,630 · Current $4,300 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Facility- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018, employees were exposed to ingoing nip points while operating the slitter (b) Facility- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018, employees were exposed to ingoing nip point while operating the Hooper Swift small press. (c) Facility- 697 Millers Run Road, Cuddy, PA: n or about November 16, 2018, employees were exposed to ingoing nip points while operating the Hooper Swift large press. (d) Facility- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018, employees were exposed to the chain link belt while operating the Hooper Swift large press. (e) Facility- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018, employees were exposed to the sliding guide on the Hooper Swift large press while feeding material into the machine. (f) Facility- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018, employees were exposed to the sliding guide on the Hooper Swift small press while feeding material into the machine. (g) Facility- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018 employees were exposed to the sliding guide while operating the large flexo machine while feeding material into the machine. (h) Facility- 697 Millers Run Road, Cuddy, PA: On or about November 16, 2018 employees were exposed to the sliding guide while operating the small flexo machine while feeding material into the machine.
Recent events (2)
- · I (S) $4300
- · Z (S) $6630
More inspections in this industry (NAICS 322211)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343605374.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.