PICAYUNE, MS —
OSHA Inspection: HERITAGE PLASTICS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HERITAGE PLASTICS, INC. in 1002 HUNT STREET, PICAYUNE, MS 39466 (NAICS 326122). OSHA activity number 343625828.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HERITAGE PLASTICS, INC.
- Site address
- 1002 HUNT STREET
- City
- PICAYUNE
- State
- MS
- ZIP
- 39466
- Mailing
- 1002 HUNT STREET, PICAYUNE, MS 39466
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326122
- Employees
- 136
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C07 I A
- Issued
- Apr 3, 2019
- Abate by
- Apr 11, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: (a) North building - On or about November 28, 2018 the employer had not performed adequate training for employees who are authorized to perform energy control procedures exposing employees to amputation hazards from energy sources such as but not limited to electrical and kinetic energy while performing tasks including but not limited to start-up, maintenance, servicing, and jam clearing of the Farrell Compound Mixer.
Recent events (2)
- — I (S) $13260
- — Z (S) $13260
1910.147 C07 I B
- Issued
- Apr 3, 2019
- Abate by
- Apr 11, 2019
- Penalty
- Initial $0 · Current $13,260
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: (a) North building - On or about November 28, 2018 the employer had not performed adequate training for employees who are affected when energy control procedures are applied to the Farrell Compound Mixer exposing employees to amputation hazards from energy sources such as but not limited to electrical and kinetic energy while performing tasks including but not limited to start-up, maintenance, servicing, and jam clearing.
Recent events (2)
- — I (S) $13260
- — Z (S) $0
1910.212 A03 II
- Issued
- Apr 3, 2019
- Abate by
- Apr 25, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) North building - On or about November 28, 2018 the employer did not provide guarding to prevent employees exposure to amputation hazards at the point of operation while they fed whip material into the Farrel Compound Mixer machines by hand to build up the AMPs.
Recent events (2)
- — I (S) $13260
- — Z (S) $13260
1910.147 C04 I
- Issued
- Apr 3, 2019
- Abate by
- Apr 18, 2019
- Penalty
- Initial $132,598 · Current $13,260 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) North building - On or before November 28, 2018 the employer did not develop, document and utilize procedures for energy control exposing employees to amputation hazards from energy sources such as but not limited to electrical and kinetic energy while performing tasks including but not limited to start-up, maintenance, servicing, and jam clearing of the Farrell Compound Mixer.
Recent events (2)
- — I (S) $13260
- — Z (W) $132598
1910.147 D04 I
- Issued
- Apr 3, 2019
- Abate by
- Apr 18, 2019
- Penalty
- Initial $0 · Current $13,260
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. (a) North building - On or before November 28, 2018 the employer did not affix a lockout or tagout device exposing employees to amputation hazards from energy sources such as but not limited to electrical and kinetic energy while performing tasks including but not limited to start-up, maintenance, servicing, and jam clearing of the Farrell Compound Mixer.
Recent events (2)
- — I (S) $13260
- — Z (W) $0
More inspections at Heritage Plastics, INC.
View Heritage Plastics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326122)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343625828.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.