Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SLT CONSTRUCTION CORPORATION

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of SLT CONSTRUCTION CORPORATION in 147 HATHERLY ROAD, SCITUATE, MA 02066 (NAICS 238910). OSHA activity number 343646113.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch SLT Construction Corporation — free Get an email when a new federal OSHA severe-injury report for SLT Construction Corporation is published. One employer, no account, unsubscribe in one click.
Site address
147 HATHERLY ROAD
City
SCITUATE
State
MA
ZIP
02066
Mailing
3 MARION DRIVE, CARVER, MA 02330
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
10
Ownership type
A

6 citations on file for this inspection.

1926.20 B02

Deleted Serious Gravity 5 2 instances 4 exposed
Issued
Jun 5, 2019
Abate by
Jun 13, 2019
Penalty
Initial $7,293 · Current $0 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s).  Jobsite:  The company did not have a competent person inspect the bulldozer horn to make sure that it was working properly.  Instance A:  The D5K bulldozer horn was not being inspected.  Instance B:  The D8R bulldozer horn was not inspected on February 27, 2019.
Recent events (3)
  • — F (S) $0
  • — C (S) $7293
  • — Z (S) $7293

1926.602 A09 I

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jun 5, 2019
Abate by
Jun 13, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.602(a)(9)(i): Bidirectional machine(s) were not equipped with an operable horn, distinguishable from the surrounding noise level, which could be operated as needed when the machine is moving in either direction.  Jobsite:  Instance A:  On December 17, 2019, the horn on the CAT D5K 60-50 bulldozer was inoperable.  Instance B;  On February 27, 2019, the horn on the CAT D8R bulldozer was inoperable.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.21 B02

Deleted Serious Gravity 10 1 instance 20 exposed
Issued
Jun 5, 2019
Abate by
Jul 3, 2019
Penalty
Initial $10,210 · Current $0 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:  Heavy equipment operators and laborers have not been adequately trained in the avoidance of struck-by injuries.
Recent events (3)
  • — F (S) $0
  • — C (S) $10210
  • — Z (S) $10210

1926.601 B14

Other-than-serious 1 instance 1 exposed
Issued
Jun 5, 2019
Abate by
Jun 13, 2019
Penalty
Initial $8,752 · Current $8,752
29 CFR 1926.601(b)(14): All defects were not corrected before motor vehicle(s) were placed in service:    Location:      A Volvo A40 F dump truck had a badly damaged ladder used to access the cab.
Recent events (3)
  • — F (O) $8752
  • — C (S) $8752
  • — Z (S) $8752

5(a)(1)

Deleted Serious Gravity 10 1 instance 20 exposed
Issued
Jun 5, 2019
Abate by
Jul 3, 2019
Penalty
Initial $10,210 · Current $0 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that adequate precautions were not taken to prevent struck-by injuries from the operation of heavy equipment.  Jobsite:  Precautions were not taken to prevent struck-by injuries from heavy equipment performing grading work.  On December 7, 2018, a laborer was fatally injured when he was struck by a bulldozer.  The bulldozer operator was performing road grading work which requires the operator to focus on the bulldozer blade.  Road grading work also requires the laborer to work near the bulldozer on an ongoing basis as s/he measures surface elevations, removes rocks from the bulldozer path, etc.
Recent events (3)
  • — F (S) $0
  • — C (S) $10210
  • — Z (S) $10210

1904.40 A

Other-than-serious 1 instance 84 exposed
Issued
Jun 5, 2019
Abate by
Jun 13, 2019
Penalty
Initial $1,459 · Current $1,459
29 CFR 1904.40(a): The employer failed to provide copies of the injury and illness records to an authorized representative within four hours of the request:  Facility:  Incomplete OSHA injury and illness logs were provided more than two months after the initial OSHA request.
Recent events (3)
  • — F (O) $1459
  • — C (O) $1459
  • — Z (O) $1459

View SLT Construction Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343646113.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.