GLENCOE, AL ·
OSHA Inspection: J.F. MORGAN GENERAL CONTRACTORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J.F. MORGAN GENERAL CONTRACTORS, INC. in 201 WEST CHASTAIN BOULEVARD, GLENCOE, AL 35905 (NAICS 236220). OSHA activity number 343677720.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J.F. MORGAN GENERAL CONTRACTORS, INC.
- Site address
- 201 WEST CHASTAIN BOULEVARD
- City
- GLENCOE
- State
- AL
- ZIP
- 35905
- Mailing
- 1110 JONES ROAD, ANNISTON, AL 36207
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 12
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.453 B02 V
- Issued
- Jan 23, 2019
- Penalty
- Initial $5,304 · Current $3,182 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift: a) On or about 12/19/2018 - 201 West Chastain Blvd, Glencoe, AL, employees taking measurements and installing sheet metal around the eave of a building were not protected from ejection/fall hazards while working at 10 feet above the ground.
Recent events (2)
- · I (S) $3182.4
- · Z (S) $5304
1926.454 A
- Issued
- Jan 23, 2019
- Abate by
- Feb 4, 2019
- Penalty
- Initial $3,220 · Current $1,932 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) On or about 12/19/2018 - 201 West Chastain Blvd, Glencoe, AL, employees taking measurements and installing sheet metal from a rough terrain forklift with a basket attached to the forks had not been trained to recognize hazards of ejection/falling while working at approximately 10 feet above the ground.
Recent events (2)
- · I (S) $1932
- · Z (S) $3220
1926.602 D
- Issued
- Jan 23, 2019
- Abate by
- Feb 4, 2019
- Penalty
- Initial $3,220 · Current $1,932 Reduced
General-duty citation text
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l):Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178. a) On or about 12/19/2018 - 201 West Chastain Blvd, Glencoe, AL, an employee operating a JCB5CE7GKH2577288, rough terrain forklift and lifting employees to take measurements and to install sheet metal had not been trained.
Recent events (2)
- · I (S) $1932
- · Z (S) $3220
1926.451 C02 IV
- Issued
- Jan 23, 2019
- Abate by
- Feb 11, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use: a) On or about 12/19/2018 - 201 West Chastain Blvd, Glencoe, AL, employees taking measurements and installing sheet metal were standing in a steel basket that was fabricated by the employer.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 236220)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343677720.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.