OSHA Inspection: BRANDON WELDING AND FABRICATION, INC.

Issued

2019-02-08 00:00:00

Penalty

Initial $2273.00 · Current $2273.00

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  At this establishment, employees wore elastomeric, half-face, negative-pressure, tight-fitting respirators without first undergoing a medical evaluation.

Issued

2019-02-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):  At this establishment, employees wore elastomeric, half-face, negative-pressure, tight-fitting respirators prior to being fit tested to wear the respirators.

Issued

2019-02-08 00:00:00

Abate by

2019-03-07 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:   At this establishment, employees wore elastomeric, half-face, negative-pressure, tight-fitting respirators.  The employer did not provide the information contained in Appendix D to the employees.

Issued

2019-02-08 00:00:00

Penalty

Initial $1932.00 · Current $1932.00

General-duty citation text

29 CFR 1910.305(d)(2): Panelboards were not mounted in cabinets, cutout boxes, or enclosures approved for the purpose and were not dead front:  At this workshop, the LP-4 electrical panel did not have a dead front, exposing employees to live conductors.

Issued

2019-02-08 00:00:00

Penalty

Initial $212.00 · Current $212.00

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:  At this facility, unused openings in electrical equipment were discovered in the overflow area on the southeast side of the shop in the following instances:  a.  Right side of #6 MIG Welding Machine Square D safety switch box; and, b.  Front panel of the electrical breaker box labeled LP-4 / VIA LDP-1 / CKT #1-3-5.  Brandon Welding and Fabrication, Inc. was previously cited for a violation of this Occupational Safety and Health standard which was contained in OSHA inspection number 1233029, citation number 1, item number 2 and was affirmed as a final order on August 17, 2017, with respect to a workplace located at 9002 Leopard Street, Corpus Christi, Texas 78409.