CHALMETTE, LA —
OSHA Inspection: ALL SERVICE MACHINE SHOP INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALL SERVICE MACHINE SHOP INC. in 630 BONITA DR., CHALMETTE, LA 70043 (NAICS 332312). OSHA activity number 343690962.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL SERVICE MACHINE SHOP INC.
- Site address
- 630 BONITA DR.
- City
- CHALMETTE
- State
- LA
- ZIP
- 70043
- Mailing
- P O BOX 618, CHALMETTE, LA 70044
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 10
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 18, 2019
- Penalty
- Initial $2,772 · Current $1,663 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about January 2, 2019, in the Machine Shop, the employer allowed an employee to operate a Kingston Lathe while not having a fixed or movable guard in place to protect against point of operation injuries and contact with rotating parts.
Recent events (2)
- — I (S) $1663.2
- — Z (S) $2772
1910.212 A03 II
- Issued
- Jan 18, 2019
- Abate by
- Feb 7, 2019
- Penalty
- Initial $1,663 · Current $998 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about January 2, 2019, in the Machine Shop, the employer failed to ensure the following equipment had a guard around the bit: 1. Kingston Milling Machine 2. Bridgeport Milling Machine
Recent events (2)
- — I (S) $997.8
- — Z (S) $1663
1910.253 B02 IV
- Issued
- Jan 18, 2019
- Abate by
- Jan 31, 2019
- Penalty
- Initial $1,663 · Current $998 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use: On or about January 2, 2019, in the Welding and Fabrication area, the employer failed to ensure a compressed gas oxygen cylinder had a valve cap in place while in storage.
Recent events (2)
- — I (S) $997.8
- — Z (S) $1663
1910.253 B04 III
- Issued
- Jan 18, 2019
- Abate by
- Jan 31, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one half-hour: On or about January 2, 2019, in the Welding and Fabrication area, the employer failed to ensure a compressed gas cylinder of oxygen and four compressed gas cylinders of propylene were separated by a fire resistant barrier or a distance of at least 20 feet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at ALL Service Machine Shop INC.
View ALL Service Machine Shop INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343690962.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.