Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: PATRICIA AYALA DBA PADILLA SIDING CONSTRUCTION INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PATRICIA AYALA DBA PADILLA SIDING CONSTRUCTION INC. in 339-345 S. JEWEL CT., PALATINE, IL 60074 (NAICS 238170). OSHA activity number 343694626.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Patricia Ayala DBA Padilla Siding Construction INC. for free Get an email when a new federal OSHA severe-injury report for Patricia Ayala DBA Padilla Siding Construction INC. is published. One employer, no account, unsubscribe in one click.
Site address
339-345 S. JEWEL CT.
City
PALATINE
State
IL
ZIP
60074
Mailing
963 CHARLELA LN. APT. 207, ELK GROVE VILLAGE, IL 60007
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
6
Ownership type
Private (A)

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Apr 30, 2019
Abate by
Jun 3, 2019
Penalty
Initial $319 · Current $319
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:    Patricia Ayala dba Padilla Siding Construction Inc.., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number            Item Number                    Abatement Date  01                                03                                           03/07/2019    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • · Z (O) $319

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2019
Penalty
Initial $2,273 · Current $2,273
29 CFR 1926.100(a):  Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:    a) On January 3, 2019, employees were not wearing protective helmets where there was a possible danger of head injury.  No abatement certification or documentation is required for this item.
Recent events (1)
  • · Z (S) $2273

1926.501 B13

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 1, 2019
Penalty
Initial $3,978 · Current $3,978
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    a)  On January 3, 2019, employees engaged in siding installation work were not protected from fall hazards while working at an elevation of approximately 19 feet above the ground.  No abatement certification or documentation is required for this item.
Recent events (1)
  • · Z (S) $3978

1926.503 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2019
Abate by
Mar 7, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee who might be exposed to fall hazards:    a)  On or about January 3, 2019, employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • · Z (S) $2842

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343694626.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.