BOISE, ID —
OSHA Inspection: GLAZ-TECH INDUSTRIES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GLAZ-TECH INDUSTRIES in 1200 W AMITY RD, BOISE, ID 83705 (NAICS 327211). OSHA activity number 343703641.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GLAZ-TECH INDUSTRIES
- Site address
- 1200 W AMITY RD
- City
- BOISE
- State
- ID
- ZIP
- 83705
- Mailing
- 1200 W AMITY RD, BOISE, ID 83705
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327211
- Employees
- 29
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 27, 2019
- Abate by
- Mar 25, 2019
- Penalty
- Initial $4,831 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Glass Tempering Furnace: On or about January 9, 2019 and at times prior, the employer does not have specific lock and tag out procedures for employees performing maintenance on the North Glass NG-12H4215 Glass Temping Furnace with multiple electrical energy sources. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $2500
- — Z (S) $4831
1910.178 A04
- Issued
- Feb 27, 2019
- Abate by
- Mar 25, 2019
- Penalty
- Initial $9,661 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a) Production Area: On or about January 9, 2019 and at times prior, employees operate a Toyota 52-6FGU45 forklift with a lifting boom while loading and unloading 2000-4000 lbs. of glass. (b) Production Area: On or about January 9, 2019 and at times prior, employees operate a Komatsu FG45S-G forklift with a lifting boom while loading and unloading 2000-4000 lbs. of mirrors and laminate glass. Note: Abatement certification is required for this item
Recent events (2)
- — I (S) $5000
- — Z (S) $9661
1910.178 A05
- Issued
- Feb 27, 2019
- Abate by
- Mar 25, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: (a) Production Area: On or about January 9, 2019 and at times prior, employees operate a Toyota 52-6FGU45 forklift with a lifting boom while loading and unloading 2000-4000 lbs. of glass. (b) Production Area: On or about January 9, 2019 and at times prior, employees operate a Komatsu FG45S-G forklift with a lifting boom while loading and unloading 2000-4000 lbs. of mirrors and laminate glass. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L03 I G
- Issued
- Feb 27, 2019
- Abate by
- Mar 25, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(3)(i)(G): Powered industrial truck operators did not receive training on attachment adaptation, weight of the attachment, and use limitations; (a) Production Area: On or about January 9, 2019 and at times prior, employees operate a Toyota 52-6FGU45 forklift with a lifting boom while loading and unloading 2000-4000 lbs. of glass. (b) Production Area: On or about January 9, 2019 and at times prior, employees operate a Komatsu FG45S-G forklift with a lifting boom while loading and unloading 2000-4000 lbs. of mirrors and laminate glass. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Glaz-Tech Industries
View Glaz-Tech Industries's full OSHA safety record →
More inspections in this industry (NAICS 327211)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343703641.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.