Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: DYNATECT MANUFACTURING, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of DYNATECT MANUFACTURING, INC. in 2300 S. CALHOUN RD, NEW BERLIN, WI 53151 (NAICS 332710). OSHA activity number 343703773.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dynatect Manufacturing, INC. for free Get an email when a new federal OSHA severe-injury report for Dynatect Manufacturing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2300 S. CALHOUN RD
City
NEW BERLIN
State
WI
ZIP
53151
Mailing
2300 S CALHOUN RD, NEW BERLIN, WI 53151
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
285
Ownership type
Private (A)

3 citations on file for this inspection.

1910.22 A01

Serious Gravity 1 1 instance 7 exposed
Issued
Jun 12, 2019
Abate by
Jun 20, 2019
Penalty
Initial $4,347 · Current $2,174 Reduced

Hazardous substances 9030

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition:    (a) On or about March 28, 2019, and on dates prior, in the rubber bellows manufacturing area, the passageways and walking-working surfaces were not maintained in a clean condition, exposing employees to slip, trip, and overexposure hazards due to the easily aerated talc material accumulated on the floors and surfaces of the work area.
Recent events (2)
  • · I (S) $2173.5
  • · Z (S) $4347

1910.1000 A02

Serious Gravity 5 1 instance 4 exposed
Issued
Jun 12, 2019
Abate by
Jan 31, 2020
Penalty
Initial $8,695 · Current $4,348 Reduced

Hazardous substances 90309135

29 CFR 1910.1000(a)(2): Employee(s) were exposed to an airborne concentration of particulates not otherwise regulated, total dust, listed in Table Z-1 in excess of the 8 hour Time Weighted Average concentration of 15 milligrams per cubic meter of air:    (a)  The assembler in the bellows production area was exposed to particulates not otherwise regulated - total dust at an 8-hour time weighted average of 18.28 milligrams per cubic meter of air, approximately 1.22 times the limit of 15 milligrams per cubic meter of air.  The sample was collected on March 28, 2019 during a 432 minute sampling period and exposure calculations include a zero increment for the 48 minutes not sampled.
Recent events (2)
  • · I (S) $4347.5
  • · Z (S) $8695

1910.1000 E

Serious Gravity 5 1 instance 4 exposed
Issued
Jun 12, 2019
Abate by
Jan 31, 2020
Penalty
Initial $0 · Current $0

Hazardous substances 90309135

29 CFR 1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d):     (a)  The assembler in the bellows production area was exposed to particulates not otherwise regulated - total dust at an 8-hour time weighted average of 18.28 milligrams per cubic meter of air, approximately 1.22 times the limit of 15 milligrams per cubic meter of air.  The sample was collected on March 28, 2019 during a 432 minute sampling period and exposure calculations include a zero increment for the 48 minutes not sampled.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

View Dynatect Manufacturing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343703773.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.