OSHA Inspection: FUNAI SERVICE CORPORATION

Issued

Jan 17, 2019

Abate by

Feb 22, 2019

Penalty

Initial $7,068 · Current $4,948 Reduced

General-duty citation text

29 CFR 1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.   a. On or before January 9, 2019, the employer did not verify that the personal protective equipment hazard assessment had been performed through a written certification for workplace hazards.

Issued

Jan 17, 2019

Abate by

Feb 22, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.133(a)(1): The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.     a. On or about January 9, 2019, in the scrap area of the technical center department, the employer did not ensure that employees removing components from damaged televisions with cordless drills and screwdrivers were provided with and used at a minimum safety glasses.

Issued

Jan 17, 2019

Penalty

Initial $4,240 · Current $2,968 Reduced

General-duty citation text

29 CFR 1910.157(c)(1): The employer shall provide portable fire extinguishers and shall mount, locate and identify them so that they are readily accessible to employees without subjecting the employees to possible injury.   a. On or about January 9, 2019, adjacent to the south central exit door in the logistics department, the employer did not ensure that the Ansul Sentry portable dry chemical fire extinguisher (model: A10T; S/N: YU-183776) was mounted so that it was readily accessible.  The fire extinguisher was blocked by two Big Air industrial fans and other items.

Issued

Jan 17, 2019

Abate by

Jan 30, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(b)(2)(i): All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear.   a. On or about January 9, 2019, above the southeast exit door in the logistics department, a metal junction box containing electrical conductors did not have a cover.