SYRACUSE, NY ·
OSHA Inspection: SDC CONSTRUCTION SERVICES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SDC CONSTRUCTION SERVICES, INC. in 1120 E GENESEE STREET, SYRACUSE, NY 13210 (NAICS 238350). OSHA activity number 343709192.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SDC CONSTRUCTION SERVICES, INC.
- Site address
- 1120 E GENESEE STREET
- City
- SYRACUSE
- State
- NY
- ZIP
- 13210
- Mailing
- 6600 RICE RD, VICTOR, NY 14564
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 15
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1903.19 C01
- Issued
- Feb 12, 2020
- Abate by
- Mar 3, 2020
- Penalty
- Initial $433 · Current $433
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: a) At the site, on or about 02/12/2020: The employer did not provide abatement certification for Citation 1, Items 001, 002a and 002b issued on February 6, 2019. An abatement demand letter was sent to the employer on April 26, 2019 and August 19, 2019. Abatement certification is required for this item.
Recent events (1)
- · Z (O) $433
1926.21 B02
- Issued
- Feb 6, 2019
- Abate by
- Feb 19, 2019
- Penalty
- Initial $3,031 · Current $3,031
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: On or about 1/9/2019, 1120 East Genesee Street, Syracuse, NY: Employees were not provided with training regarding the recognition and avoidance of hazards such as those associated with the use of saws. This includes, but is not limited to the proper procedures and equipment/ guards needed while using a table saw to rip wood and make dado cuts in wood. Abatement certification is required for this item.
Recent events (1)
- · Z (S) $3031
1926.304 F
- Issued
- Feb 6, 2019
- Abate by
- Feb 19, 2019
- Penalty
- Initial $3,789 · Current $3,789
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust of the saw nor did they have spreaders: On or about 1/9/2019, 1120 East Genesee Street, Syracuse, NY: Employees were utilizing a Dewalt ten inch portable table saw without anti kick back fingers while ripping wood, without a featherboard while performing dado cuts, and without a spreader while ripping wood. Abatement certification is required for this item.
Recent events (1)
- · Z (S) $3789
1926.304 I01
- Issued
- Feb 6, 2019
- Abate by
- Feb 19, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut: On or about 1/9/2019, 1120 East Genesee Street, Syracuse, NY: Employees were utilizing a Dewalt ten inch portable table saw without a guard while ripping wood. Abatement certification is required for this item.
Recent events (1)
- · Z (S) $0
More inspections in this industry (NAICS 238350)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343709192.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.