Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HAZLETON CASTING COMPANY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HAZLETON CASTING COMPANY in REAR 225 NORTH CEDAR STREET, HAZLETON, PA 18201 (NAICS 331513). OSHA activity number 343738233.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hazleton Casting Company — free Get an email when a new federal OSHA severe-injury report for Hazleton Casting Company is published. One employer, no account, unsubscribe in one click.
Site address
REAR 225 NORTH CEDAR STREET
City
HAZLETON
State
PA
ZIP
18201
Mailing
PO BOX 21, WEATHERLY, PA 18255
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331513
Employees
28
Ownership type
A

4 citations on file for this inspection.

1910.28 B03 IV

Serious Gravity 5 1 instance 5 exposed
Issued
Jun 6, 2019
Abate by
Jun 26, 2019
Penalty
Initial $5,304 · Current $3,713 Reduced
29 CFR 1910.28(b)(3)(iv): The employer did not ensure each employee was protected from falling into a ladderway floor hole or ladderway platform hole by a guardrail system and toeboards erected on all exposed sides, except at the entrance to the hole, where a self-closing gate or an offset must be used.  a) Shaker, Rear 225 North Cedar Street, Hazleton, PA - The ladderway floor hole to the vault beneath the shaker was not guarded by an adequate guardrail system and self-closing gate or offset exposing employees to a ten (10) foot fall hazard, on or about January 25, 2019.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (S) $3712.8
  • — Z (S) $5304

1910.178 L01 II

Serious Gravity 1 1 instance 28 exposed
Issued
Jun 6, 2019
Abate by
Jun 26, 2019
Penalty
Initial $3,978 · Current $2,785 Reduced
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer did not ensure that each operator had successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).  a) Facility, Rear 225 North Cedar Street, Hazleton, PA - Employees operated a Yale Electric Pallet Jack (Model MLW06008CN12T92760 (Serial No. B828NO1725V) and transported materials without having received documented/certified formal instruction, practical training, or an operator evaluation thereby exposing themselves and other employees to struck-by hazards, on or about January 25, 2019.  b) Facility, Rear 225 North Cedar Street, Hazleton, PA - Employees operated a Baker Electric Pallet Jack (Model PAL-W) and transported materials without having received documented/certified formal instruction, practical training, or an operator evaluation thereby exposing themselves and other employees to struck-by hazards, on or about January 25, 2019.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (S) $2784.6
  • — Z (S) $3978

1910.178 A06

Serious Gravity 1 1 instance 28 exposed
Issued
Jun 6, 2019
Abate by
Jun 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition.  a) Facility, Rear 225 North Cedar Street, Hazleton, PA - Employees operated a Yale Electric Pallet Jack (Model MLW06008CN12T92760 (Serial No. B828NO1725V) with an illegible nameplate and load rating chart exposing themselves and other employees to struck-by hazards, on or about January 25, 2019.  b) Facility, Rear 225 North Cedar Street, Hazleton, PA - Employees operated a Baker Electric Pallet Jack (Model PAL-W) without a nameplate or load rating chart exposing themselves and other employees to struck-by hazards, on or about January 25, 2019.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.146 C01

Other-than-serious 1 instance 5 exposed
Issued
Jun 6, 2019
Abate by
Jun 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces:  a) Shaker Vault, Rear 225 North Cedar Street, Hazleton, PA - The employer had not evaluated the confined spaces in the workplace and allowed employees to enter the vault (confined space) beneath the shaker and perform inspection and maintenance activities, on or about January 25, 2019.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Hazleton Casting Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343738233.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.