MERIDIAN, ID —
OSHA Inspection: ADVANCED MARBLE AND GRANITE
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of ADVANCED MARBLE AND GRANITE in 2266 EAST COMMERCIAL ST., MERIDIAN, ID 83642 (NAICS 327991). OSHA activity number 343759965.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADVANCED MARBLE AND GRANITE
- Site address
- 2266 EAST COMMERCIAL ST.
- City
- MERIDIAN
- State
- ID
- ZIP
- 83642
- Mailing
- 2266 EAST COMMERCIAL ST., MERIDIAN, ID 83642
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 25
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.134 C01
- Issued
- Mar 21, 2019
- Abate by
- Apr 16, 2019
- Penalty
- Initial $3,789 · Current $1,900 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) Dry Bay: On or about February 5, 2019 and at times prior, employees were wearing North half mask respirators while cutting grooves in granite and quartz counter tops. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $1900
- — Z (S) $3789
1910.134 E01
- Issued
- Mar 21, 2019
- Abate by
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) Dry Bay: On or about February 5, 2019 and at times prior, employees were wearing North half mask respirators while cutting grooves in granite and quartz counter tops. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F01
- Issued
- Mar 21, 2019
- Abate by
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): (a) Dry Bay: On or about February 5, 2019 and at times prior, employees were wearing North half mask respirators while cutting grooves in granite and quartz counter tops. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 H02 I
- Issued
- Mar 21, 2019
- Abate by
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or were not packed or stored to prevent deformation of the facepiece and exhalation valve: (a) Dry Bay: On or about February 5, 2019 and at times prior, employees were wearing North half mask respirators while cutting grooves in granite and quartz counter tops. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K03
- Issued
- Mar 21, 2019
- Abate by
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: (a) Dry Bay: On or about February 5, 2019 and at times prior, employees were wearing North half mask respirators while cutting grooves in granite and quartz counter tops. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 A04
- Issued
- Mar 21, 2019
- Abate by
- Jul 1, 2019
- Penalty
- Initial $4,546 · Current $2,300 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a) Yard: On or about February 5, 2019 and at times prior, employees operate a Yale GLC155CA forklift with a lifting boom while loading and unloading approximately 1600-1800 lbs. of granite and quartz. (b) Yard: On or about February 5, 2019 and at times prior, employees operate a Yale GLC155CA forklift with a hole cut into the fork to load and unload approximately 1600-1800 lbs. of granite and quartz. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $2300
- — Z (S) $4546
1910.178 L03 I G
- Issued
- Mar 21, 2019
- Abate by
- Jul 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(3)(i)(G): Powered industrial truck operators did not receive initial training on fork and attachment adaptation, operation, and use limitations; (a) Yard: On or about February 5, 2019 and at times prior, employees operate a Yale GLC155CA forklift with a lifting boom while loading and unloading approximately 1600-1800 lbs. of granite and quartz. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1053 D01
- Issued
- Mar 21, 2019
- Abate by
- Apr 16, 2019
- Penalty
- Initial $3,789 · Current $1,900 Reduced
General-duty citation text
29 CFR 1910.1053(d)(1): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section: (a) Dry Bay: On or about February 5, 2019 and at times prior, employees are exposed to silica while dry grinding on granite and quartz counter tops with a Mikita Grinder. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $1900
- — Z (S) $3789
1910.1053 F02 I
- Issued
- Mar 21, 2019
- Abate by
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1053(f)(2)(i): The employer did not establish and implement a written silica exposure control plan: (a) Dry Bay: On or about February 5, 2019 and at times prior, employees are exposed to silica while dry grinding on granite and quartz counter tops with a Mikita Grinder. Note: Abatement certification is required for this item
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Advanced Marble and Granite
View Advanced Marble and Granite's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343759965.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.