OSHA Inspection: VASILE IABLONCIUK DBA M 6 CONSTRUCTION

Issued

Aug 12, 2019

Abate by

Aug 16, 2019

Penalty

Initial $3,978 · Current $2,000 Reduced

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:       a)  On February 21, 2019, employees engaged in carpentry work were not protected from fall hazards of approximately 40 feet to the ground, while working along unprotected edge of the roof.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 12, 2019

Abate by

Sep 13, 2019

Penalty

Initial $2,842 · Current $1,000 Reduced

General-duty citation text

29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee who might be exposed to fall hazards:      a)  On  or about February 21, 2019, employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Aug 12, 2019

Abate by

Aug 16, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.405(a)(2)(ii)(E):  Lamps used in temporary wiring for general illumination were not protected from accidental contact or breakage:  a)  On February 21, 2019, the employer did not ensure that the lamps used in temporary wiring to illuminate the work area were protected from accidental contact or breakage.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).