Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PENCCO INDUSTRIES, LLC

Monitoring inspection · Health discipline

On , OSHA opened a monitoring health inspection of PENCCO INDUSTRIES, LLC in 831 BARTLETT ROAD, SEALY, TX 77474 (NAICS 325188). OSHA activity number 343810214.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Pencco Industries, LLC — free Get an email when a new federal OSHA severe-injury report for Pencco Industries, LLC is published. One employer, no account, unsubscribe in one click.
Site address
831 BARTLETT ROAD
City
SEALY
State
TX
ZIP
77474
Mailing
P.O. BOX 600, SAN FELIPE, TX 77473
Inspection type
Monitoring (D)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325188
Employees
21
Ownership type
A

6 citations on file for this inspection.

1910.146 K03 I

Serious Gravity 5 1 instance 4 exposed
Issued
Apr 10, 2019
Abate by
Apr 29, 2019
Penalty
Initial $5,304 · Current $3,182 Reduced
29 CFR 1910.146(k)(3)(i): Each authorized entrant did not use a chest or full body harness, with a retrieval line attached at the center of the entrant's back near shoulder level, or above the entrant's head.  On or about February 26, 2019 and at times prior thereto, the employer did not ensure Permit Required Confined Space Entrants wore a retrieval system while in a confined space, exposing employees to the hazards of a confined space.   NOTE: Wristlets may be used in lieu of the chest or full body harness if the employer can demonstrate that the use of a chest or full body harness is infeasible or creates a greater hazard and that the use of wristlets is the safest and most effective alternative.
Recent events (2)
  • — I (S) $3182.4
  • — Z (S) $5304

1910.147 C04 I

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 10, 2019
Abate by
Apr 29, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section.   On or about Febuary 26, 2019 and at times prior thereto, the host employer, Pencco Industries, did not utilize the written procedures for the control of potentially hazardous energy when employee(s) from Link Staffing Services were engaged in maintenance activities, exposing employee(s) to the hazards of unexpected start-up of energy sources.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

1910.147 C07 I

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 10, 2019
Abate by
Apr 29, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees.  On or about February 26, 2019 and at times prior thereto, the host employer, Pencco Industires, did not ensure that Link Staffing Services employee(s) performing maintenance, were properly trained in the use of energy control methods, exposing employees to the hazard of unexpected start-up energy sources.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C05 I

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 10, 2019
Abate by
Apr 29, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing, or blocking of machines or equipment from energy sources.  On or about February 26, 2019 and at times prior thereto, the host employer, Pencco Industries, did not ensure employees from Link Staffing Services performing maintenance operations were provided a means of locking to isolate equipment, exposing employee(s) to the hazards of unexpected start-up of energy sources.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

1910.147 C08

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 10, 2019
Abate by
Apr 29, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(8): Lockout or tagout was not performed only by the authorized employees who are performing the servicing or maintenance.  On or about February 26, 2019 and at times prior thereto, the host employer, Pencco Industires, did not ensure that Link Staffing Services employee(s) performing maintenance were in control of all energy sources by means of lock-out during the activities, exposing employee(s) to the hazards of unexpected start-up of energy sources.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.151 C

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 10, 2019
Abate by
May 28, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use.  On or about February 26, 2019 and at times prior thereto, emergency eyewash stations within work areas for employees exposed to corrosive materials such as but not limited to, Ferric Sulfate Solution, were not maintained in a working condition, exposing employees to the hazard of corrosive chemical splash:  a) Eyewash station between tank ST1 and ST2 were missing a spray head and plumbing did not operate.  b) Eyewash station near ventilation hood were missing spray heads, steel receptor was broken from drainage pipe and plumbing did not operate.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

View Pencco Industries, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343810214.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.