Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: IMPERIAL ALUMINUM - MINERVA LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of IMPERIAL ALUMINUM - MINERVA LLC in 217 ROOSEVELT STREET, MINERVA, OH 44657 (NAICS 331314). OSHA activity number 343813317.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Imperial Aluminum - Minerva LLC — free Get an email when a new federal OSHA severe-injury report for Imperial Aluminum - Minerva LLC is published. One employer, no account, unsubscribe in one click.
Site address
217 ROOSEVELT STREET
City
MINERVA
State
OH
ZIP
44657
Mailing
217 ROOSEVELT STREET, MINERVA, OH 44657
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331314
Employees
90
Ownership type
A

4 citations on file for this inspection.

1910.132 A

Serious Gravity 10 1 instance 12 exposed
Issued
May 16, 2019
Abate by
Jul 31, 2019
Penalty
Initial $9,282 · Current $9,282
29 CFR 1910.132(a): Application. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.     a. On and/or before April 9, 2019, in the tilt 6 furnace area of the production department, the employer did not ensure that employees, performing activities such as melting and pouring, cleaning troughs, skimming sows, adding scrap casting to undersized sows, and any other activities with exposure to molten aluminum, wore primary clothing protection with no open pockets and wore pant legs over the top of the spats, as opposed to wearing only secondary protection (100% cotton) or street clothing and pant legs tucked inside of the spats, to protect the body and extremities against thermal burns.  Materials of primary clothing protection included the following:  aluminized material, leather, wool, or other fabrics which were acceptable for molten aluminum.
Recent events (2)
  • — I (S) $9282
  • — Z (S) $9282

1910.136 A

Serious Gravity 10 1 instance 12 exposed
Issued
May 16, 2019
Abate by
Jul 31, 2019
Penalty
Initial $9,282 · Current $0 Reduced
29 CFR 1910.136(a): General requirements. The employer shall ensure that each affected employee uses protective footwear when working in areas where there is a danger of foot injuries due to falling or rolling objects, or objects piercing the sole, or when the use of protective footwear will protect the affected employee from an electrical hazard, such as a static-discharge or electric-shock hazard, that remains after the employer takes other necessary protective measures.      a. On and/or before April 9, 2019, in the tilt 6 furnace area of the production department, the employer did not ensure that employees, performing activities such as conducting furnace pre-stage duties, melting and pouring, cleaning troughs, skimming sows, adding scrap casting to undersized sows, handling ingots, molds and sows, and any other activities, were provided with and used metatarsal footwear to protect from falling or rolling objects.
Recent events (2)
  • — I (S) $0
  • — Z (S) $9282

1910.132 D01 I

Repeat Gravity 10 1 instance 12 exposed
Issued
May 16, 2019
Abate by
Jul 31, 2019
Penalty
Initial $18,564 · Current $18,564
29 CFR 1910.132(d)(1): The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:     29 CFR 1910.132(d)(1)(i): Select, and have each affected employee use, the types of PPE that will protect the affected employee from the hazards identified in the hazard assessment.     a. On and/or before February 26, 2019, the employer failed to select and have employees, performing activities such as conducting furnace pre-stage duties, melting and pouring, cleaning troughs, skimming sows, adding scrap casting to undersized sows, handling ingots, molds and sows, and other activities in the production department, use protective equipment to protect the body and extremities against thermal burns and the feet from falling or rolling objects including, but not limited to, the following:  primary clothing protection with no open pockets and pant legs worn over the top of the spats; appropriate gloves tucked into the sleeves unless reaching overhead; and metatarsal footwear.     Imperial Aluminum - Minerva LLC was previously cited for a violation of this occupational safety and health standard 29 CFR 1910.132(d)(1)(i), which was contained in OSHA inspection number 1336346, citation number 1, item number 6 and was affirmed as a final order on December 7, 2018, with respect to a workplace located at 217 Roosevelt Street, Minerva, Ohio 44657.
Recent events (2)
  • — I (R) $18564
  • — Z (R) $18564

1910.132 F01 III

Repeat Gravity 10 1 instance 12 exposed
Issued
May 16, 2019
Abate by
Jul 31, 2019
Penalty
Initial $18,564 · Current $0 Reduced
29 CFR 1910.132(f)(1): The employer shall provide training to each employee who is required by this section to use PPE. Each such employee shall be trained to know at least the following:      29 CFR 1910.132(f)(1)(iii): How to properly don, doff, adjust, and wear PPE.      a. On and/or before April 9, 2019, the employer failed to provide training on how to properly don and wear personal protective equipment for employees performing activities such as melting and pouring, cleaning troughs, skimming sows, adding scrap casting to undersized sows, and any other activities with exposure to molten aluminum including, but not limited to, the following:  donning and wearing pant legs that cover the top of the spats and sleeves that cover the end of the gloves unless reaching overhead.      Imperial Aluminum - Minerva LLC was previously cited for a violation of this occupational safety and health standard 29 CFR 1910.132(f)(1)(iii), which was contained in OSHA inspection number 1336346, citation number 1, item number 7a and was affirmed as a final order on December 7, 2018, with respect to a workplace located at 217 Roosevelt Street, Minerva, Ohio 44657.
Recent events (2)
  • — I (R) $0
  • — Z (R) $18564

View Imperial Aluminum - Minerva LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343813317.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.