Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DANIEL YADAICELA

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DANIEL YADAICELA in MANNASEH DRIVE WEST ELLINGTON VILLAGE - LOT 101EL/C, GRANVILLE, OH 43023 (NAICS 238130). OSHA activity number 343813689.

Watch Daniel Yadaicela — free Get an email when a new federal OSHA severe-injury report for Daniel Yadaicela is published. One employer, no account, unsubscribe in one click.
Establishment
DANIEL YADAICELA
Site address
MANNASEH DRIVE WEST ELLINGTON VILLAGE - LOT 101EL/C
City
GRANVILLE
State
OH
ZIP
43023
Mailing
533 WHITETHORNE AVENUE, COLUMBUS, OH 43223
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

5 citations on file for this inspection.

1926.20 B01

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $3978.00 · Current $3978.00
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part.   a. On or about February 27, 2019, located at Ellington Village (Lot 101EL/C) in Granville, Ohio, the employer did not initiate and maintain safety and health programs for employees performing the framing of a residential home, thereby exposing the employees to fall, struck-by and/or caught-in hazards.
Recent events (1)
  • — Z (S) $3978

1926.21 B02

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.21(b)(2): The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.   a. On or about February 27, 2019, located at Ellington Village (Lot 101EL/C) in Granville, Ohio, the employer did not instruct employees in the recognition and avoidance of unsafe conditions and the regulations applicable to framing a residential home, thereby exposing the employees to fall, struck-by and/or caught-in hazards.
Recent events (1)
  • — Z (S) $0

1926.102 A01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3978.00 · Current $3978.00
29 CFR 1926.102(a)(1): The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.   a. On or about February 27, 2019, located at Ellington Village (Lot 101EL/C) in Granville, Ohio, employees were operating Paslode pneumatic nail guns (Model number F350S) without any means of eye protection, thereby exposing the employees to a struck-by hazard.
Recent events (1)
  • — Z (S) $3978

1926.501 B13

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $3978.00 · Current $3978.00
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502.  a. On or about February 27, 2019, located at Ellington Village (Lot 101EL/C) in Granville, Ohio, employees were installing and bracing trusses while standing on the residential home's top plate and within the truss webbing without any means of fall protection, thereby exposing the employees to a fall hazard of approximately 11 feet.
Recent events (1)
  • — Z (S) $3978

1926.1053 B01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3978.00 · Current $3978.00
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.   a. On or about February 27, 2019, located at Ellington Village (Lot 101EL/C) in Granville, Ohio, employees used a Werner aluminum extension ladder to access to and from the top of a residential home. The ladder did not extend at least three feet above the upper landing surface, thereby exposing the employees to a fall hazard of approximately 11-13 feet.
Recent events (1)
  • — Z (S) $3978

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343813689.