Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: NAGY'S COLLISION CENTERS

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of NAGY'S COLLISION CENTERS in 7966 WADSWORTH ROAD, WADSWORTH, OH 44281 (NAICS 811121). OSHA activity number 343834339.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Nagy'S Collision Centers for free Get an email when a new federal OSHA severe-injury report for Nagy'S Collision Centers is published. One employer, no account, unsubscribe in one click.
Site address
7966 WADSWORTH ROAD
City
WADSWORTH
State
OH
ZIP
44281
Mailing
7966 WADSWORTH ROAD, WADSWORTH, OH 44281
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811121
Employees
34
Ownership type
Private (A)

8 citations on file for this inspection.

1910.36 D01

Serious Gravity 5 4 instances 5 exposed
Issued
Apr 8, 2019
Abate by
Apr 26, 2019
Penalty
Initial $5,304 · Current $3,182 Reduced
29 CFR 1910.36(d)(1): Employees must be able to open an exit route door from the inside at all times without keys, tools, or special knowledge. A device such as a panic bar that locks only from the outside is permitted on exit discharge doors.    On or about March 7, 2019, the employer failed to ensure that emergency exit doors in all three buildings were able to be exited out of freely.  All of the exit doors contained one of more type of lock on the inside of the door.
Recent events (2)
  • · I (S) $3182.4
  • · Z (S) $5304

1910.37 B02

Other-than-serious 4 instances 5 exposed
Issued
Apr 8, 2019
Abate by
Apr 26, 2019
Penalty
Initial $5,304 · Current $0 Reduced
29 CFR 1910.37(b)(2): Each exit must be clearly visible and marked by a sign reading "Exit":    On or about March 7, 2019, the employer failed to ensure that an emergency exit door was marked as such in building #2.
Recent events (2)
  • · I (O) $0
  • · Z (S) $5304

1910.134 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 8, 2019
Abate by
Apr 26, 2019
Penalty
Initial $5,304 · Current $3,182 Reduced
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:    On or about March 7, 2019, the employer failed to develop and implement a written Respiratory Protection Program.  Employees are wearing respirators while they paint vehicles and vehicle components in building #3.
Recent events (2)
  • · I (S) $3182.4
  • · Z (S) $5304

1910.134 F01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 8, 2019
Abate by
Apr 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):    On or about March 7, 2019, the employer failed to ensure that employees who wear tight fitting respirators while they paint vehicles (building #3) were fit tested in order to ensure they were wearing an appropriate tight fitting respirator.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.134 G01 I A

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 8, 2019
Abate by
Apr 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.134(g)(1)(i)(A): The employer shall not permit respirators with tight-fitting facepieces to be worn by employees who have facial hair that comes between the sealing surface of the facepiece and the face or that interferes with valve function.  On or about March 7, 2019, the employer failed to ensure that employees who wear tight fitting respirators while they paint vehicles (building #3) were clean shaven so that they can achieve a tight seal with the respirator.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.134 H02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 8, 2019
Abate by
Apr 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or  were not packed or stored to prevent deformation of the facepiece and exhalation valve:  On or about March 7, 2019, the employer failed to ensure that employees who wear tight fitting respirators stored them so as to protect them from damage, dust or other contaminants.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.37 A03

Other-than-serious 4 instances 5 exposed
Issued
Apr 8, 2019
Abate by
Apr 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  On or about March 7, 2019, the employer failed to ensure that an emergency exit located in building #1 was unobstructed.  The emergency exit was blocked by various equipment , debris and a vehicle.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.303 F02

Other-than-serious 4 instances 5 exposed
Issued
Apr 8, 2019
Abate by
Apr 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:  On or about March 7, 2019, the employer failed to ensure that the electrical service feeder boxes in all three of their buildings were marked and identified as required.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343834339.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.