MANHATTAN, IL ·
OSHA Inspection: KEVIN TOLER SIDING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KEVIN TOLER SIDING in 14330 MARGARET ST., MANHATTAN, IL 60442 (NAICS 238170). OSHA activity number 343834891.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KEVIN TOLER SIDING
- Site address
- 14330 MARGARET ST.
- City
- MANHATTAN
- State
- IL
- ZIP
- 60442
- Mailing
- 968 APPLE LANE, MANTENO, IL 60950
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 2
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.20 B01
- Issued
- Apr 17, 2019
- Abate by
- May 13, 2019
- Penalty
- Initial $1,705 · Current $853 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate and maintain accident prevention programs as necessary to comply with this part: a. On or about March 7, 2019, at the above addressed jobsite, the employer did not maintain an accident prevention program to comply with the regulations of this part which included, but were not limited to employee protection when exposed to hazards related to residential construction.
Recent events (3)
- · F (S) $853
- · C (S) $1705
- · Z (S) $1705
1926.20 B02
- Issued
- Apr 17, 2019
- Abate by
- May 13, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): The employer did not initiate and maintain a safety program which provides for frequent and regular inspections of jobsites, materials, and equipment to be made by a competent person (i.e., a person who is capable of identifying exists: a. On or about March 7, 2019, at the above addressed jobsite, an inspection was not conducted by a competent person capable of correcting hazards such as falls, which could result in employee injuries.
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
1926.454 A
- Issued
- Apr 17, 2019
- Abate by
- May 13, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a. On or about March 7, 2018, at the above addressed jobsite, an employee conducting siding installation operations from an aerial lift was not provided training on how to minimize fall protection hazards, thereby exposing the employee to the hazards associated with falls.
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
1926.102 A01
- Issued
- Apr 17, 2019
- Abate by
- Apr 23, 2019
- Penalty
- Initial $1,705 · Current $853 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: a. On or about March 7, 2019, at the above addressed jobsite, an employees using a portable circular saw did not wear safety glasses, thereby exposing the employee to the hazards associated with eye injuries.
Recent events (3)
- · F (S) $853
- · C (S) $1705
- · Z (S) $1705
1926.453 B02 V
- Issued
- Apr 17, 2019
- Penalty
- Initial $1,705 · Current $852 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift: a. On or about March 7, 2019, at the above addressed jobsite, an employee performing siding installation operations from a Marklift aerial lift, Model number CH44C, approximately eight (8) feet above the ground, was not wearing a full body harnesses equipped with a lanyard, thereby exposing the employee to falls.
Recent events (3)
- · F (S) $852
- · C (S) $1705
- · Z (S) $1705
More inspections in this industry (NAICS 238170)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343834891.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.