Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TAGGART ENTERPRISES INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of TAGGART ENTERPRISES INC. in 10332 S DRANSFELDT RD, PARKER, CO 80134 (NAICS 334419). OSHA activity number 343835245.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Taggart Enterprises INC. — free Get an email when a new federal OSHA severe-injury report for Taggart Enterprises INC. is published. One employer, no account, unsubscribe in one click.
Site address
10332 S DRANSFELDT RD
City
PARKER
State
CO
ZIP
80134
Mailing
10332 S DRANSFELDT RD, PARKER, CO 80134
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
334419
Employees
17
Ownership type
A

6 citations on file for this inspection.

1910.215 A04

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 27, 2019
Penalty
Initial $2,273 · Current $1,137 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    (a)  On or about February 28, 2019, and times prior, the employer exposed employees to stuck-by hazards due to the DeWalt DW756, bench grinder work rest, located in the shop area, not being adjusted to one eighth inch.
Recent events (2)
  • — I (S) $1137
  • — Z (S) $2273

1910.215 B09

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 27, 2019
Abate by
Apr 4, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  (a)  On or about February 28, 2019, and times prior, employees in the shop area were exposed to struck-by hazards due to the DeWalt DW756 bench grinder tongue guard exceeding one fourth inch.  Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.242 B

Serious Gravity 1 1 instance 15 exposed
Issued
Mar 27, 2019
Abate by
Apr 4, 2019
Penalty
Initial $2,273 · Current $1,137 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:    (a) On February 28, 2019, and at times prior, employees in the shop area were not protected from hazards where the compressed air used for cleaning  was in excess of 30 p.s.i.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $1137
  • — Z (S) $2273

1910.1200 E01

Serious Gravity 5 1 instance 17 exposed
Issued
Mar 27, 2019
Abate by
Apr 15, 2019
Penalty
Initial $3,031 · Current $1,516 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    (a)  On or about February 28, 2019, and times prior, the employer had not developed and/or implemented a written hazard communication program to address the chemicals used in the workplace and the hazards associated with those chemicals.     A written hazard communication program shall include the following elements, as applicable:    1. An inventory of all hazardous chemicals used in the workplace;  2. Labeling of chemicals;  3. Maintaining of Safety Data Sheets for all chemicals, ensuring accessibility for employees;  4. Training;  5. Periodic review to address changes in the workplace.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $1516
  • — Z (S) $3031

1910.1200 F06

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 27, 2019
Abate by
Apr 15, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information specified under paragraphs (f)(6)(i) through (ii) of this section:  (a) On or about February 28, 2019, and at times prior, employees were exposed to hazardous chemicals where the employer did not ensure that container of FC KFL, which contains potassium hydroxide, octanoic and decanoic acid, which are damaging to tissue, was properly labeled.    Abatement note: Abatement certification and documentation are required for this item (See Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K06

Other-than-serious 1 instance 1 exposed
Issued
Mar 27, 2019
Abate by
Apr 8, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  (a)  On or about February 28, 2019, and at times prior, the employer did not provide employee(s) with Appendix D of the respirator standard, which contains information for voluntary use, where employees were voluntarily using an N95 particulate filtering facepiece.  Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Taggart Enterprises INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343835245.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.