Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MISCELLANEOUS STEEL INDUSTRIES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MISCELLANEOUS STEEL INDUSTRIES, INC. in 400 BUNTON CREEK ROAD, KYLE, TX 78640 (NAICS 332323). OSHA activity number 343843660.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Miscellaneous Steel Industries, INC. — free Get an email when a new federal OSHA severe-injury report for Miscellaneous Steel Industries, INC. is published. One employer, no account, unsubscribe in one click.
Site address
400 BUNTON CREEK ROAD
City
KYLE
State
TX
ZIP
78640
Mailing
400 BUNTON CREEK ROAD, KYLE, TX 78640
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332323
Employees
32
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 2, 2019
Abate by
Apr 22, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  On or about March 12, 2019, the Komatsu press, there were no energy control procedures developed. The Komatsu press has at a minimum of hydraulic and electrical. Employees will change dies on the machine. Employees exposed to a caught-in hazard from an unexpected start-up of the machine.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

1910.147 C06 I

Serious Gravity 1 1 instance 15 exposed
Issued
Apr 2, 2019
Abate by
Apr 22, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  On or about March 12, 2019, and times prior thereto, the employer did not perform a periodic inspection of the company's energy control program. Employees exposed to being caught-in machine from an unexpected start-up.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 2, 2019
Abate by
Apr 22, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) On or about March 12, 2019, at the Opti B34 HV drill press, the rotating chuck was not guarded. Employees drilling holes and are exposed to the rotating unguarded chuck. Employees are exposed to the hazard of being caught-in the unguarded rotating chuck.   b) On or about March 12, 2019, at the back of the AccurShear there is no guarding to protect employees from being struck by the cut steel that has falling from the shear. Employees exposed to being struck-by the falling metal.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

1910.219 F03

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 2, 2019
Abate by
Apr 22, 2019
Penalty
Initial $3,978 · Current $2,387 Reduced
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:  On or about March 12, 2019, at the AccurShear, the chain and sprockets were not guarded.  Employees will pick up scraps of metal in this area and walk past the unguarded chain and sprockets. Employees exposed to the hazard of being caught-in the unguarded rotating chain and sprocket.
Recent events (2)
  • — I (S) $2386.8
  • — Z (S) $3978

View Miscellaneous Steel Industries, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343843660.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.