DUBLIN, GA —
OSHA Inspection: P-D VALMIERA GLASS USA CORP.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of P-D VALMIERA GLASS USA CORP. in 168 WILLIE PAULK PARKWAY, DUBLIN, GA 31021 (NAICS 327993). OSHA activity number 343846994.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- P-D VALMIERA GLASS USA CORP.
- Site address
- 168 WILLIE PAULK PARKWAY
- City
- DUBLIN
- State
- GA
- ZIP
- 31021
- Mailing
- 168 WILLIE PAULK PARKWAY, DUBLIN, GA 31021
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327993
- Employees
- 429
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 4, 2019
- Abate by
- Sep 30, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Throughout Phase 1 Building (Matline) and Phase 2 Building - On or about March 7, 2019 and times prior to, the employer did not utilize specific procedures to control hazardous energy when performing maintenance and servicing activities on equipment included but not limited to the Tandem Feeder and Robot Chopper 1 & 2, thus exposing employees to caught-in, struck-by, and crushed-by hazards.
Recent events (1)
- — Z (S) $13260
1910.147 C06 I
- Issued
- Sep 4, 2019
- Abate by
- Sep 30, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: a) Throughout Phase 1 Building (Matline) and Phase 2 Building - On or about March 12, 2019 and times prior to, the employer had not conducted an inspection of the energy control procedures on an annual or more frequent basis, thus exposing employees to caught-in, struck-by, and crushed-by hazards.
Recent events (1)
- — Z (S) $13260
1910.147 C07 I A
- Issued
- Sep 4, 2019
- Abate by
- Sep 30, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Each authorized employee did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: a) Throughout Phase 1 Building (Matline) and Phase 2 Building - On or about March 7, 2019 and times prior to, employees who performed maintenance and servicing activities on equipment did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy associated with each type of equipment, and how to isolate and control the different energy sources, thus exposing employees to caught-in, struck-by, and crushed-by hazards.
Recent events (1)
- — Z (S) $13260
1910.212 A03 II
- Issued
- Sep 4, 2019
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Phase 1 Building (Matline) - On or about March 7, 2019 and times prior to, the in-feed rollers on the Fine Opener were not adequately guarded, resulting in exposure to an ingoing nip point hazard.
Recent events (1)
- — Z (S) $13260
1904.32 B03
- Issued
- Aug 1, 2019
- Abate by
- Aug 27, 2019
- Penalty
- Initial $2,085 · Current $0 Reduced
General-duty citation text
29 CFR 1904.32(b)(3): A company executive did not certify the he or she has examined the OSHA 300 Log and that he or she reasonably believes, based on his or her knowledge of the process by which the information was recorded, that the annual summary is correct and complete: a) For this Establishment - On about February 1, 2019, a company executive had not certified or examined the work-related injuries and illnesses on the 2018 OSHA 300A (or equivalent) for the injuries recorded on the 2018 calendar year OSHA 300 Log.
Recent events (2)
- — I (O) $0
- — Z (O) $2085
1904.40 A
- Issued
- Aug 1, 2019
- Penalty
- Initial $2,085 · Current $0 Reduced
General-duty citation text
29 CFR 1904.40(a): The employer did not provide an authorized government representative copies of requested records kept under Part 1904 within four (4) business hours: a) For this Establishment - On or about April 16, 2019, the employer failed to provide a copy of the OSHA 301 or equivalent form within four (4) business hours, which was requested for an injury that occurred on March 7, 2019.
Recent events (2)
- — I (O) $0
- — Z (O) $2085
More inspections at P-D Valmiera Glass USA Corp.
View P-D Valmiera Glass USA Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 327993)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343846994.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.