EAST SYRACUSE, NY —
OSHA Inspection: FLEX-HOSE COMPANY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FLEX-HOSE COMPANY INC. in 6801 CROSSBOW DRIVE, EAST SYRACUSE, NY 13057 (NAICS 332999). OSHA activity number 343849162.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FLEX-HOSE COMPANY INC.
- Site address
- 6801 CROSSBOW DRIVE
- City
- EAST SYRACUSE
- State
- NY
- ZIP
- 13057
- Mailing
- 6801 CROSSBOW DRIVE, EAST SYRACUSE, NY 13057
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 28
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Mar 29, 2019
- Penalty
- Initial $4,508 · Current $4,508
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts: a) Bldg. 2, Prep Area, on or about 3/14/19: Rotating chuck and spindle on a Rockwell Delta drill press were not guarded.
Recent events (2)
- — I (S) $4508
- — Z (S) $4508
1910.219 D01
- Issued
- Mar 29, 2019
- Penalty
- Initial $4,508 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Bldg. 2, Roll Forming Area, on or about 3/14/19: Pulleys driving the small seam welder were not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $4508
1910.219 E03 I
- Issued
- Mar 29, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): a) Bldg. 2, Roll Forming Area, on or about 3/14/19: V belt driving the small seam welder was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.28 B03 IV
- Issued
- Mar 29, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.28(b)(3)(iv): Each employee was not protected from falling into the ladderway platform hole at the entrance to the hole by a self-closing gate or offset: a) Bldg. 1, overhead storage area, on or about 3/14/19: An overhead storage area approximately 8 feet from floor level was not provided with a swing gate at the entrance.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 B01 I
- Issued
- Mar 29, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: a) Bldg. 2, Roll Forming Area, on or about 3/14/19: Conductors providing current to the control panel for the small seam welder were not protected from abrasions.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Flex-Hose Company INC.
View Flex-Hose Company INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343849162.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.