MACEDON, NY —
OSHA Inspection: KTK THERMAL TECHNOLOGIES INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KTK THERMAL TECHNOLOGIES INC. in 1657 E. PARK DRIVE, MACEDON, NY 14502 (NAICS 332999). OSHA activity number 343853008.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KTK THERMAL TECHNOLOGIES INC.
- Site address
- 1657 E. PARK DRIVE
- City
- MACEDON
- State
- NY
- ZIP
- 14502
- Mailing
- 1657 E. PARK DRIVE, MACEDON, NY 14502
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 38
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Mar 20, 2019
- Abate by
- Apr 15, 2019
- Penalty
- Initial $5,304 · Current $3,978 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Tool Room, on or about 3/14/19: Dayton grinder was not equipped with a guard over the rotating wheel shaft end nut. b) CNC Department, on or about 1/14/19: Portable deburring machine was not equipped with guarding over the rotating shaft and end nuts. c) CNC Department, on or about 3/14/19: Central Machinery grinder was not equipped with guarding over the rotating shaft and end nuts. d) CNC 2, on or about 3/14/19: Deburring machine was not equipped with guarding over the rotating shaft and end nut.
Recent events (2)
- — I (S) $3978
- — Z (S) $5304
1910.212 A03 II
- Issued
- Mar 20, 2019
- Abate by
- Apr 15, 2019
- Penalty
- Initial $6,630 · Current $4,973 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Assembly Area, on or about 5/14/19: (2) Dake presses were not guarded to prevent employees from reaching into the point of operation during operation.
Recent events (2)
- — I (S) $4972.5
- — Z (S) $6630
1910.215 A04
- Issued
- Mar 20, 2019
- Abate by
- Apr 1, 2019
- Penalty
- Initial $3,978 · Current $2,984 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: a) CNC Department, on or about 3/14/19: Central Machinery grinder was not used with a work rest to support offhand grinding work on the right side.
Recent events (2)
- — I (S) $2983.5
- — Z (S) $3978
1910.215 B09
- Issued
- Mar 20, 2019
- Abate by
- Apr 24, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Tool Room, on or about 3/14/19: Dayton grinder used for deburring purposes was not equipped with an adjustable tongue guard and the distance between the abrasive wheel and the top peripheral member measured 3/4 inches.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at KTK Thermal Technologies INC.
View KTK Thermal Technologies INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343853008.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.