SAINT LOUIS, MO —
OSHA Inspection: ANACOMP
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ANACOMP in 1856 BORMAN COURT, SAINT LOUIS, MO 63146 (NAICS 541614). OSHA activity number 343853966.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANACOMP
- Site address
- 1856 BORMAN COURT
- City
- SAINT LOUIS
- State
- MO
- ZIP
- 63146
- Mailing
- 1856 BORMAN COURT, SAINT LOUIS, MO 63146
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541614
- Employees
- 112
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.178 L01 I
- Issued
- Jun 13, 2019
- Penalty
- Initial $6,630 · Current $3,315 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): On or about March 14, 2019, at the jobsite located, 1856 Borman Court, Saint Louis, Missouri, the employer did not ensure employee(s) who were allowed to operate the Deep-Reach Fork Truck (Raymond, Model No: EASI DR25TT; Serial No: EZ-A00-15981; Volts: 36) and the Straddle Stacker Walkie (Crown, Model No: WS2300-40TL; Serial No: 5A138797; Data No: WSTL128424242VLB) were competent to do so as demonstrated by completing training and evaluation.
Recent events (2)
- — I (S) $3315
- — Z (S) $6630
1910.178 L01 II
- Issued
- Jun 13, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5). On or about March 14, 2019, at the jobsite located, 1856 Borman Court, Saint Louis, Missouri, the employer did not ensure employee(s) who were allowed to operate the Deep-Reach Fork Truck (Raymond, Model No: EASI DR25TT; Serial No: EZ-A00-15981; Volts: 36) and the Straddle Stacker Walkie (Crown, Model No: WS2300-40TL; Serial No: 5A138797; Data No: WSTL128424242VLB) had completed training as prescribed by the standard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 P01
- Issued
- Jun 13, 2019
- Abate by
- Jul 10, 2019
- Penalty
- Initial $6,630 · Current $3,315 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): On or about March 14, 2019, at the jobsite located, 1856 Borman Court, Saint Louis, Missouri, the Straddle Stacker Walkie (Crown, Model No: WS2300-40TL; Serial No: 5A138797; Data No: WSTL128424242VLB) had not been taken out of service where a defect was found. The battery charging cable had damage to the outer jacket.
Recent events (2)
- — I (S) $3315
- — Z (S) $6630
1910.178 Q07
- Issued
- Jun 13, 2019
- Abate by
- Jul 10, 2019
- Penalty
- Initial $6,630 · Current $3,315 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: On or about March 14, 2019, at the jobsite located, 1856 Borman Court, Saint Louis, Missouri, warehouse employee(s) were not required to examine the Deep-Reach Fork Truck (Raymond, Model No: EASI DR25TT; Serial No: EZ-A00-15981; Volts: 36) and the Straddle Stacker Walkie (Crown, Model No: WS2300-40TL; Serial No: 5A138797; Data No: WSTL128424242VLB) prior to operation. Employee(s) were operating a the Straddle Stacker Walkie with damage to the power cord jacket.
Recent events (2)
- — I (S) $3315
- — Z (S) $6630
1904.32 A01
- Issued
- Jun 13, 2019
- Abate by
- Jul 10, 2019
- Penalty
- Initial $1,706 · Current $853 Reduced
General-duty citation text
29 CFR 1904.32(a)(1): 29 CFR 1904.32(a)(1): At the end of each calendar year the employer did not review its OSHA 300 log to verify that the entries were complete and accurate: On or about March 14, 2019, at the jobsite located, 1856 Borman Court, Saint Louis, Missouri, the employer had not verified the entries in the OSHA 300 Logs were complete and accurate. Where deficiencies were evident they were not corrected.
Recent events (2)
- — I (O) $853
- — Z (O) $1706
1904.32 A03
- Issued
- Jun 13, 2019
- Abate by
- Jul 10, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.32(a)(3): 29 CFR 1904.32(a)(3): At the end of the calendar year, the employer did not certify the OSHA 300A Form or its equivalent. On or about March 14, 2019, at the jobsite located, 1856 Borman Court, Saint Louis, Missouri, the employer did not ensure the OSHA 300A, Summary of Work-Related Injuries and Illnesses, had been signed and certified at the end of the calendar year. The form was not signed and certified by a management official as required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1904.32 B01
- Issued
- Jun 13, 2019
- Abate by
- Jul 10, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.32(b)(1): The employer did not review the OSHA 300 Log entries as extensively as necessary to make sure the entries were complete and correct: On or about March 14, 2019, at the jobsite located, 1856 Borman Court, Saint Louis, Missouri, the employer had not adequately reviewed the OSHA 300 Log or completeness and correctness. The columns for case classification were not marked to indicate the outcome for each case as required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Anacomp
View Anacomp's full OSHA safety record →
More inspections in this industry (NAICS 541614)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343853966.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.