Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: ALAMO ROADWAY MATERIALS LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of ALAMO ROADWAY MATERIALS LLC in 5643 FM 78, SAN ANTONIO, TX 78219 (NAICS 238910). OSHA activity number 343854063.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Alamo Roadway Materials LLC for free Get an email when a new federal OSHA severe-injury report for Alamo Roadway Materials LLC is published. One employer, no account, unsubscribe in one click.
Site address
5643 FM 78
City
SAN ANTONIO
State
TX
ZIP
78219
Mailing
5643 FM 78, SAN ANTONIO, TX 78219
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
8
Ownership type
A

5 citations on file for this inspection.

1910.23 C11

Serious Gravity 1 1 instance 8 exposed
Issued
Aug 7, 2019
Abate by
Oct 1, 2019
Penalty
Initial $1,705 · Current $1,000 Reduced
29 CFR 1910.23(c)(11): Portable ladders used to gain access to an upper landing surface did not have side rails that extended at least 3 feet (0.9 m) above the upper landing surface:    Pit Area, Packaging Plant:  On or about March 15, 2019, and at times prior thereto,  employees were exposed to a fall hazard while using a Louisville extension ladder without the side rails extending at least 3 feet above the landing.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $1705

1910.134 D01 III

Serious Gravity 5 1 instance 8 exposed
Issued
Aug 7, 2019
Abate by
Oct 1, 2019
Penalty
Initial $3,410 · Current $1,500 Reduced
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form:         Packaging Plant:  On or about March 15, 2019, and times prior thereto, the employer did not evaluate and identify respiratory hazards or estimate exposures to respiratory hazards for employees who were required to package Thermoplastic Traffic Marking Compound containing calcium carbonate, a respiratory irritant.
Recent events (2)
  • · I (S) $1500
  • · Z (S) $3410

1910.146 C01

Serious Gravity 5 1 instance 8 exposed
Issued
Aug 7, 2019
Abate by
Oct 1, 2019
Penalty
Initial $2,842 · Current $1,500 Reduced
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces:    Pit Area, Packaging Plant: On or about March 15, 2019, and at times prior thereto, the employer did not evaluate and/or assess the pit area where employees were required to enter the area using an extension ladder for maintenance work on the PROMAX Mixer machine, to determine if the work area was a permit-required confined space.
Recent events (2)
  • · I (S) $1500
  • · Z (S) $2842

1910.147 C01

Serious Gravity 10 1 instance 8 exposed
Issued
Aug 7, 2019
Abate by
Oct 1, 2019
Penalty
Initial $3,978 · Current $1,500 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:      Packaging Plant: On or about March 15, 2019, and at times prior thereto, employees were exposed to a caught-in hazard from the unexpected startup of the PROMAX Mixer machine while entering the pit area without locking out all sources of energy.
Recent events (2)
  • · I (S) $1500
  • · Z (S) $3978

1910.1200 H03 III

Serious Gravity 5 1 instance 8 exposed
Issued
Aug 7, 2019
Abate by
Oct 1, 2019
Penalty
Initial $3,410 · Current $1,500 Reduced
29 CFR 1910.1200(h)(3)(iii): Employee training did not include the measures employees can take to protect themselves from chemical hazards, including specific procedures the employer had implemented to protect employees from exposure to hazardous chemicals, such as appropriate work practices, emergency procedures and personal protective equipment to be used:    Packaging Plant:  On or about March 15, 2019, and times prior thereto, employees were exposed to chemical hazards while handling products such as, but not limited to, Thermoplastic Traffic Marking Compound, and Granifort 10-20 UW without being informed by the employer of the associated hazards of these chemicals, symptoms of exposure, and precautionary measures.
Recent events (2)
  • · I (S) $1500
  • · Z (S) $3410

View Alamo Roadway Materials LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343854063.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.