Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: ARROW MANUFACTURED PRODUCTS

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ARROW MANUFACTURED PRODUCTS in 5000 CENTRAL FWY, WICHITA FALLS, TX 76306 (NAICS 332710). OSHA activity number 343857298.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Arrow Manufactured Products for free Get an email when a new federal OSHA severe-injury report for Arrow Manufactured Products is published. One employer, no account, unsubscribe in one click.
Site address
5000 CENTRAL FWY
City
WICHITA FALLS
State
TX
ZIP
76306
Mailing
P.O. BOX 8145, WICHITA FALLS, TX 76307
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
60
Ownership type
Private (A)

5 citations on file for this inspection.

1910.132 A

Serious Gravity 1 1 instance 1 exposed
Issued
Mar 26, 2019
Penalty
Initial $3,381 · Current $3,978
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered:    On or about March 15, 2019, and at times prior thereto, the employer did not ensure employees wore the protective equipment (seatbelts) while operating a power industrial truck exposing the employees to ejection and crushed-by hazards.
Recent events (2)
  • · I (S) $3978
  • · Z (S) $3381

1910.178 P01

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 26, 2019
Abate by
Apr 23, 2019
Penalty
Initial $3,978 · Current $0 Reduced
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):    On or about March 15, 2019 and at times prior thereto, the employer did not ensure forklifts found to need repairs or has defective equipment were taken out of service and restored to safe operating conditions exposing employees to ejection, struck-by and crushed-by hazards.
Recent events (2)
  • · I (S) $0
  • · Z (S) $3978

1910.178 Q07

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Mar 26, 2019
Abate by
Apr 16, 2019
Penalty
Initial $3,978 · Current $0 Reduced
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service:   On or about March 15, 2019, and at times prior thereto, the employer did not ensure power industrial trucks were examined before being placed into service.
Recent events (2)
  • · I (S) $0
  • · Z (S) $3978

1910.215 A04

Serious Gravity 1 1 instance 1 exposed
Issued
Mar 26, 2019
Abate by
Apr 16, 2019
Penalty
Initial $3,978 · Current $3,978
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work.   On or about March 15, 2018, and at times prior thereto, the employer did not ensure work rests were installed and used on the Black & Decker bench grinder exposing employees to caught-in and struck-by hazards.
Recent events (2)
  • · I (S) $3978
  • · Z (S) $3978

1910.215 B09

Serious Gravity 1 1 instance 1 exposed
Issued
Mar 26, 2019
Abate by
Apr 16, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The employer did not ensure that the bench grinder was equipped with top tongue guards that could be adjusted to the constantly decreasing diameter of the abrasive wheels.   On or about March 15, 2018, the employer exposed employees to caught-in and struck-by hazards due to the bench grinder tongue guards were missingOn or about March 15, 2018, and at times prior thereto, the employer did not ensure tongue guards were installed and used on the Black & Decker bench grinder exposing employees to caught-in and struck-by hazards.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343857298.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.