COLORADO SPRINGS, CO —
OSHA Inspection: TRI-GON PRECISION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TRI-GON PRECISION, INC. in 820 SAHWATCH STREET, COLORADO SPRINGS, CO 80903 (NAICS 332721). OSHA activity number 343859708.
Where did this inspection happen?
- Establishment
- TRI-GON PRECISION, INC.
- Site address
- 820 SAHWATCH STREET
- City
- COLORADO SPRINGS
- State
- CO
- ZIP
- 80903
- Mailing
- 820 SAHWATCH STREET, COLORADO SPRINGS, CO 80903
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332721
- Employees
- 18
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Mar 26, 2019
- Abate by
- Apr 1, 2019
- Penalty
- Initial $3,031 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about March 5, 2019 and at times prior, employees were exposed to serious hazards while using a vertical bench sander. The ingoing nip point of the idler pulley was not provided with a guard cover.
Recent events (2)
- — I (S) $0
- — Z (S) $3031
1910.219 D01
- Issued
- Mar 26, 2019
- Abate by
- Apr 1, 2019
- Penalty
- Initial $3,031 · Current $3,030 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) On or about March 5, 2019 and at times prior, employees were exposed to serious hazards while using a cylindrical grinder. The pulley of the grinder was not provided with a guard cover.
Recent events (2)
- — I (S) $3030
- — Z (S) $3031
1910.219 E01 I
- Issued
- Mar 26, 2019
- Abate by
- Apr 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) On or about March 5, 2019 and at times prior, employees were exposed to serious hazards while using a cylindrical grinder. The belt of the grinder was not provided with a guard cover.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Mar 26, 2019
- Abate by
- Apr 1, 2019
- Penalty
- Initial $2,273 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) On or about March 5, 2019 and at times prior, employees were exposed to electric shock while using a cylindrical grinder. The electrical cord of the grinder was not provided with a strain relief.
Recent events (2)
- — I (S) $0
- — Z (S) $2273
More inspections at Tri-Gon Precision, INC.
View Tri-Gon Precision, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332721)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343859708.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.