HUMBLE, TX ·
OSHA Inspection: VERONICA RIVERA-BENITO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VERONICA RIVERA-BENITO in 8711 N. SAM HOUSTON PKWY, HUMBLE, TX 77396 (NAICS 238170). OSHA activity number 343860672.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VERONICA RIVERA-BENITO
- Site address
- 8711 N. SAM HOUSTON PKWY
- City
- HUMBLE
- State
- TX
- ZIP
- 77396
- Mailing
- 2106 W. GREENS ROAD, HOUSTON, TX 77067
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 6
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.451 B01
- Issued
- Mar 20, 2019
- Penalty
- Initial $2,842 · Current $2,842
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii): On or about March 19, 2019, on the south side of newly built commercial building where employees were exposed to a fall hazard exceeding 10 feet when performing stucco work from fabricated frame scaffolds without each platform fully planked.
Recent events (1)
- · Z (S) $2842
1926.451 C02 IV
- Issued
- Mar 20, 2019
- Penalty
- Initial $3,978 · Current $3,978
General-duty citation text
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use: On or about March 19, 2019, on the south side of newly built commercial building where employees were exposed to a fall hazard exceeding 10 feet while being elevated by a JLG Skytrak without the forklift being designed by the manufacturer for such use.
Recent events (1)
- · Z (S) $3978
1926.451 C02 V
- Issued
- Mar 20, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(v): The employer used forklifts to support scaffold platforms without ensuring that the entire platform was attached to the fork and that the forklift was not moved horizontally while the platform was occupied: On or about March 19, 2019, on the south side of newly built commercial building where employees were exposed to a fall hazard exceeding 10 feet while being elevated and moved in a forklift without ensuring that the platform was attached to the forks.
Recent events (1)
- · Z (S) $0
1926.451 E01
- Issued
- Mar 20, 2019
- Penalty
- Initial $2,842 · Current $2,842
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Crossbraces were used as a means of access. On or about March 19, 2019, on the south side of newly built commercial building where employees were exposed to a fall hazard exceeding 10 feet when performing stucco work from fabricated frame scaffolds without a portable ladder, hook-on ladder, attachable ladder, or other safe means of access.
Recent events (1)
- · Z (S) $2842
1926.451 G01
- Issued
- Mar 20, 2019
- Penalty
- Initial $3,978 · Current $3,978
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level. On or about March 19, 2019, on the south side of newly built commercial building where employees were exposed to a fall hazard exceeding 10 feet when performing stucco work from fabricated frame scaffolds without a fall protection system.
Recent events (1)
- · Z (S) $3978
More inspections in this industry (NAICS 238170)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343860672.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.