DE PERE, WI ·
OSHA Inspection: VAN RITE & FATHER, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of VAN RITE & FATHER, INC. in 1680 MID VALLEY RD., DE PERE, WI 54115 (NAICS 236220). OSHA activity number 343861621.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VAN RITE & FATHER, INC.
- Site address
- 1680 MID VALLEY RD.
- City
- DE PERE
- State
- WI
- ZIP
- 54115
- Mailing
- 1649 SAND ACRES DRIVE, DE PERE, WI 54115
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 6
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- May 17, 2019
- Abate by
- Jun 10, 2019
- Penalty
- Initial $3,978 · Current $3,978
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazards from falling wood trusses: Van Rite & Father, Inc. at the work-site located at 1680 Mid Valley Rd., De Pere, WI: On or about March 18 and 19, 2019 employees squaring roof trusses and installing bracing were exposed to struck-by hazards while working on and/or under trusses that had not been braced to resist roll-over and/or collapse due to the lack of top chord lateral bracing, the lack of top chord diagonal bracing, the lack of bottom and web member bracing.
Recent events (2)
- · I (S) $3978
- · Z (S) $3978
1926.28 A
- Issued
- May 17, 2019
- Abate by
- May 29, 2019
- Penalty
- Initial $3,410 · Current $1,705 Reduced
General-duty citation text
29 CFR 1926.28(a): The employer is responsible for requiring the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions or where this part indicates the need for using such equipment to reduce the hazards to the employees: On or about March 19, 2019 the employer did not require employees expose to falling objects and/or debris to wear personal protective equipment (PPE) such as, but not limited to safety glasses, hard hats, etc.
Recent events (2)
- · I (O) $1705
- · Z (S) $3410
1910.178 A05
- Issued
- May 17, 2019
- Abate by
- Jun 24, 2019
- Penalty
- Initial $3,410 · Current $1,023 Reduced
General-duty citation text
29 CFR 1910.178(a)(5): If the truck is equipped with front-end attachments other than factory installed attachments, the user shall request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered. On or about March 19, 2019 the employer did not ensure the Caterpillar Telehandler, equipped with a metal man-basket, was to identify the attachment and it's effect on the vehicle's capacity.
Recent events (2)
- · I (O) $1023
- · Z (S) $3410
1910.178 L01 I
- Issued
- May 17, 2019
- Abate by
- Jul 31, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): On or about March 19, 2019 the employer did not ensure each employee operating forklift was competent to safety operate a powered industrial truck as demonstrated by the successful completion of the training and evaluation required.
Recent events (2)
- · I (O) $0
- · Z (S) $0
1926.503 A01
- Issued
- May 17, 2019
- Abate by
- Jul 31, 2019
- Penalty
- Initial $3,978 · Current $1,193 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards: On or about March 19, 2019 the employer did not provide employees working from elevated surfaces above six feet with training to ensure they were able to recognize fall hazards and the implementation of procedures to minimize fall hazards.
Recent events (2)
- · I (O) $1193.4
- · Z (S) $3978
More inspections at VAN Rite & Father, INC.
View VAN Rite & Father, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343861621.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.