Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CLOSED LOOP RECYCLING

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of CLOSED LOOP RECYCLING in 5555 MANCHESTER AVE, SAINT LOUIS, MO 63110 (NAICS 423930). OSHA activity number 343861738.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Closed Loop Recycling — free Get an email when a new federal OSHA severe-injury report for Closed Loop Recycling is published. One employer, no account, unsubscribe in one click.
Site address
5555 MANCHESTER AVE
City
SAINT LOUIS
State
MO
ZIP
63110
Mailing
5555 MANCHESTER AVE, SAINT LOUIS, MO 63110
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423930
Employees
25
Ownership type
A

5 citations on file for this inspection.

1910.178 P01

Serious Gravity 5 1 instance 6 exposed
Issued
Jun 19, 2019
Penalty
Initial $5,636 · Current $3,382 Reduced
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):    Garage: Employer is exposing employees to hazardous conditions.  The employees are permitted to operate forklifts with defects.      On 03/19/2019 the employees operated a Toyota forklift with defects such as, but not limited to, damaged tires, missing slip resistance pad on bare metal brake pedal, and damaged seat with protruding pinch points.
Recent events (2)
  • — I (S) $3381.6
  • — Z (S) $5636

1910.178 Q07

Serious Gravity 5 1 instance 6 exposed
Issued
Jun 19, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(7): Industrial trucks were not examined at least daily before being placed in service:   5555 Manchester Avenue, Garage: Employer is exposing employees to hazardous conditions.  The employees are permitted to operate forklifts without performing the required daily safety examination prior to operating the forklifts.   On 03/19/2019 it was determined that a forklift was operated without the required safety examinations where visible defects such as, but not limited to, damaged tires, damaged seat with protruding pinch points, and bare metal brake pedal were observed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C04 II B

Serious Gravity 5 1 instance 20 exposed
Issued
Jun 19, 2019
Penalty
Initial $5,636 · Current $3,382 Reduced
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy:     Production area: Employer is exposing employees to hazardous conditions.  The employees perform lockout and tag out activities without written machine specific lockout procedures.       On 03/19/2019 it was determined that there were no written machine specific lockout procedures in use for machines such as, but not limited to, the Baler and Sealer.
Recent events (2)
  • — I (S) $3381.6
  • — Z (S) $5636

1910.303 B07 IV

Serious Gravity 5 1 instance 6 exposed
Issued
Jun 19, 2019
Penalty
Initial $5,636 · Current $3,382 Reduced
29 CFR 1910.303(b)(7)(iv): Electric equipment had damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating:     Pre-Glove area: Employer is exposing employees to hazardous conditions.  The employees are permitted to use a damaged quadruplet receptacle outlet to supply power to electrical activities in the area.     On 03/19/2019 employees were exposed to electrical hazards where they used a quadruplet outlet with damaged two upper receptacles exposed the internal wiring of the electrical equipment.
Recent events (2)
  • — I (S) $3381.6
  • — Z (S) $5636

1910.1020 G01

Other-than-serious 1 instance 25 exposed
Issued
Jun 19, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.1020(g)(1): Employees covered by 29 CFR 1910.1020 were not informed, upon entering employment and at least annually thereafter, of the existence, location, availability of any records covered by this section, of the identity of the person responsible for maintaining and providing access to records, or of each employee's right of access to these records:   Establishment: Employees who had medical and exposure records such as, but not limited to, workplace injury records and safety data sheets for chemical exposure, were not informed of the existence, location, availability of the records, and person responsible for providing access to the records.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343861738.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.