Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,192,068Inspections Most recent open 2026-08-04 Last loaded 2026-08-07

OSHA Inspection: ANDANTEX USA, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of ANDANTEX USA, INC. in 1705 VALLEY RD, OCEAN, NJ 07712 (NAICS 333613). OSHA activity number 343868808.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Andantex USA, INC. for free Get an email when a new federal OSHA severe-injury report for Andantex USA, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
ANDANTEX USA, INC.
Site address
1705 VALLEY RD
City
OCEAN
State
NJ
ZIP
07712
Mailing
1705 VALLEY RD, OCEAN, NJ 07712
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333613
Employees
21
Ownership type
A

4 citations on file for this inspection.

1910.151 C

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 3, 2019
Abate by
Sep 25, 2019
Penalty
Initial $3,789 · Current $2,349 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a) Manufacturing Area: An eyewash station capable of 15 minutes of continuous flush, was not provided where corrosive chemicals were used such as but not limited to ZEP Industrial Purple Degreaser Concentrate. On or about 3/12/19.            NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (S) $2349
  • · Z (S) $3789

1910.179 J02 III

Other-than-serious 1 instance 3 exposed
Issued
Sep 3, 2019
Abate by
Sep 25, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which included the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed:  a) Manufacturing Area: A monthly inspection of the JM Hoist hooks was not documented which included the date of inspection, the signature of the person who performed the inspection and an identifier of the hook which was inspected. On or about 3/12/19.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.179 J02 IV

Other-than-serious 1 instance 3 exposed
Issued
Sep 3, 2019
Abate by
Sep 25, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.179(j)(2)(iv): Monthly inspections of hoist chains, with a certification record which included the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected, were not performed.  a) Manufacturing Area: A monthly inspection of the JM Hoist chains was not documented, which included the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected. On or about 3/12/19.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.179 J03

Other-than-serious 1 instance 3 exposed
Issued
Sep 3, 2019
Abate by
Oct 18, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months.    a) Manufacturing Area: A periodic inspection of the JM Hoist was not conducted in the past 12 months. On or about 3/12/19.        NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343868808.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.