SCHRIEVER, LA ·
OSHA Inspection: FLOW LINE VALVE AND CONTROLS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FLOW LINE VALVE AND CONTROLS, LLC in 110 MAIN PROJECT RD., SCHRIEVER, LA 70395 (NAICS 332911). OSHA activity number 343869152.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FLOW LINE VALVE AND CONTROLS, LLC
- Site address
- 110 MAIN PROJECT RD.
- City
- SCHRIEVER
- State
- LA
- ZIP
- 70395
- Mailing
- 110 MAIN PROJECT RD., SCHRIEVER, LA 70395
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332911
- Employees
- 9
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 3, 2019
- Abate by
- Jun 20, 2019
- Penalty
- Initial $3,789 · Current $2,273 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about March 18, 2019, in the Valve Assembly Room, the employer did not develop written procedures with specific steps for the control of potentially hazardous energy regarding a hydraulic press.
Recent events (2)
- · I (S) $2273.4
- · Z (S) $3789
1910.212 A03 II
- Issued
- May 3, 2019
- Abate by
- May 15, 2019
- Penalty
- Initial $2,273 · Current $1,364 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) On or about March 18, 2019, in the Valve Assembly Room, the employer failed to ensure a Sears Craftsman drill press (Model No. 113.213213, S/N 9611400021) had a guard around the bit.
Recent events (2)
- · I (S) $1363.8
- · Z (S) $2273
1910.253 B04 III
- Issued
- May 3, 2019
- Penalty
- Initial $3,789 · Current $2,273 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one half-hour: a) On or about March 18, 2019, at the outside loading dock area, the employer failed to ensure a compressed gas cylinder of oxygen and four compressed gas cylinders of propane were separated by a fire resistant barrier or a distance of at least 20 feet
Recent events (2)
- · I (S) $2273.4
- · Z (S) $3789
1910.305 B01 II
- Issued
- May 3, 2019
- Penalty
- Initial $2,273 · Current $1,364 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) On or about March 18, 2019, in the air compressor room, the employer failed to ensure all circuit openings in an electrical panel were effectively closed.
Recent events (2)
- · I (S) $1363.8
- · Z (S) $2273
1910.305 G02 II
- Issued
- May 3, 2019
- Penalty
- Initial $2,273 · Current $1,364 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: a) On or about March 18, 2019, at the outside loading dock area, an extension cord powering a fan had damage to the outer and inner sheathing. The inner wiring was spliced together and wrapped with tape.
Recent events (2)
- · I (S) $1363.8
- · Z (S) $2273
More inspections at Flow Line Valve and Controls, LLC
View Flow Line Valve and Controls, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332911)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343869152.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.