Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LEONEL GIRON

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LEONEL GIRON in 7428 CAKEBREAD DR., MARRERO, LA 70072 (NAICS 238130). OSHA activity number 343869202.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Leonel Giron — free Get an email when a new federal OSHA severe-injury report for Leonel Giron is published. One employer, no account, unsubscribe in one click.
Establishment
LEONEL GIRON
Site address
7428 CAKEBREAD DR.
City
MARRERO
State
LA
ZIP
70072
Mailing
37313 HWY 74 LOT 175, GEISMAR, LA 70734
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
May 20, 2019
Abate by
May 30, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles.   a) On or about March 19, 2019, at 7428 Cakebread Rd., Marrero, LA, the employer failed to ensure an employee wore eye protection while operating a PneuTools Coil Nailer pneumatic nail gun (Model No. CN65SP) .
Recent events (1)
  • — Z (S) $2842

1926.102 A02

Serious Gravity 5 1 instance 1 exposed
Issued
May 20, 2019
Abate by
May 30, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.102(a)(2): Eye and face protection equipment did not meet the requirements of ANSI Z87.1-1968, Practice for Occupational and Educational Eye and Face Protection:        a) On or about March 19, 2019, at 7428 Cakebread Dr., Marrero, LA, the employer failed to ensure an employee wore ANSI approved eye protection while operating a DeWalt circular saw (Model No. DWE 575).
Recent events (1)
  • — Z (S) $0

1926.501 B02 I

Serious Gravity 5 1 instance 2 exposed
Issued
May 20, 2019
Abate by
May 30, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.501(b)(2)(i): Each employee who was constructing a leading edge 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems, safety net systems, or personal fall arrest systems:   a) On or about March 19, 2019, 7428 Cakebread Dr., Marrero, LA, the employer failed to ensure employees performing roofing operations wore fall protection or the edge protected by a guardrail system. The employees were up to approximately 15 feet above the ground.
Recent events (1)
  • — Z (S) $2842

1926.416 E01

Other-than-serious 1 instance 1 exposed
Issued
May 20, 2019
Abate by
May 30, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used:   a) On or about March 19, 2019, at 7428 Cakebread Dr., Marrero, LA, the employer failed to ensure the electrical cord on a DeWalt circular saw (Model No. DWE 575) did not have damage to the outer sheathing.
Recent events (1)
  • — Z (O) $0

View Leonel Giron's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343869202.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.