OLYMPIA, WA ·
OSHA Inspection: BONNEVILLE POWER ADMINISTRATION- OLYMPIA HEADQUARTERS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BONNEVILLE POWER ADMINISTRATION- OLYMPIA HEADQUARTERS in 5240 TROSPER ROAD, OLYMPIA, WA 98512 (NAICS 221122). OSHA activity number 343878450.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Site address
- 5240 TROSPER ROAD
- City
- OLYMPIA
- State
- WA
- ZIP
- 98512
- Mailing
- 5240 TROSPER ROAD, OLYMPIA, WA 98512
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 221122
- Employees
- 49
- Ownership type
- D
Citations
6 citations on file for this inspection.
1910.145 C02 I
- Issued
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.145(c)(2)(i): Caution signs were not used to warn against potential hazards or to caution against unsafe practices: a) Power Systems Control Shop; Two soldering stations were located in the shop and lead containing solder was available for use. CAUTION LEAD signs were not posted to alert employees of the presence of lead.
Recent events (1)
- · Z (S) $0
1910.215 B09
- Issued
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not attached properly so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: a) Transmission Line Maintenance Shop; The Baldor grinders tongue guard was not installed properly. It was not installed in a way which could be adjusted to the constantly decreasing diameter of the wheel. This exposes employees to impalement hazards.
Recent events (1)
- · Z (S) $0
1910.305 J01 I
- Issued
- Apr 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(j)(1)(i): Fixtures, lampholders, lamps, rosettes, and receptacles located within 8 feet of the floor had live parts exposed to employee contact: a) Substation Maintenance Shop Tool Room; Florescent light fixtures had unguarded florescent light bulbs located approximately 7 feet 8 inches from the floor. The florescent light bulbs were not guarded to prevent accidental breakage/contact.
Recent events (1)
- · Z (S) $0
1910.1200 E01 I
- Issued
- Apr 16, 2019
- Abate by
- May 20, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet: a) Substation Maintenance Shop; Hazardous substances including but not limited to: Certified Labs Kool-Spray, Fabulous Blaster, Drummond 3-2-1 Electric Contact Cleaner, and Rustoleum Spray Paint were not on the inventory list. b) Substation Maintenance Shop Tool Room; ZEP Industrial Purpose Cleaner, Degreaser was not on the inventory list. c) Transmission Line Maintenance Shop; Hazardous substances including but not limited to: Simple Green, Henry Fibered Black Roof Coating, Chemsearch NC-1,2,3 Moisture Displacement for Electrical Equipment, CRC Brakleen, and Fluorocarbon Dry Lubricant and Releasing Agent were not on the inventory list. d) Power System Control Office; Hazardous substances including but not limited to: Tech Spray Triple Core Solder, Kester Solder, Chem-wick lite SD, Solder-wick, and Professional Tite bond Original Wood Glue were not on the inventory list.
Recent events (1)
- · Z (S) $0
1910.1200 F06 II
- Issued
- Apr 16, 2019
- Abate by
- Apr 26, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: a) Substation Maintenance Shop; A field sample of mineral oil from transformers in a glass bottle was not labeled. b) Power System Control Office; A plastic bag containing several different types of solder was not labeled. The solder should be separated and labeled. CORRECTED DURING INSPECTION
Recent events (1)
- · Z (S) $0
1910.1200 G08
- Issued
- Apr 16, 2019
- Abate by
- May 20, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work shift to employees when they were in their work area(s): a) Substation Maintenance Shop; Safety data sheets were not kept for hazardous substances including but not limited to: Certified Labs Kool-Spray, Fabulous Blaster, Drummond 3-2-1 Electric Contact Cleaner, and Rustoleum Spray Paint. b) Substation Maintenance Shop Tool Room; A safety data sheet was not kept for ZEP Industrial Purpose Cleaner, Degreaser. c) Transmission Line Maintenance Shop; Safety data sheets were not kept for hazardous substances including but not limited to: Simple Green, Henry Fibered Black Roof Coating, Chemsearch NC-1,2,3 Moisture Displacement for Electrical Equipment, CRC Brakleen, and Fluorocarbon Dry Lubricant and Releasing Agent. d) Power System Control Office; Safety data sheets were not kept for hazardous substances including but not limited to: Tech Spray Triple Core Solder, Kester Solder, Chem-wick lite SD, Solder-wick, and Professional Tite bond Original Wood Glue.
Recent events (1)
- · Z (S) $0
More inspections in this industry (NAICS 221122)
More inspections in WA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343878450.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.