WAUSAU, WI —
OSHA Inspection: SOUTHERN STRETCH FORMING
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SOUTHERN STRETCH FORMING in 7555 STEWART AVE., WAUSAU, WI 54401 (NAICS 332999). OSHA activity number 343880795.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTHERN STRETCH FORMING
- Site address
- 7555 STEWART AVE.
- City
- WAUSAU
- State
- WI
- ZIP
- 54401
- Mailing
- 7555 STEWART AVE., WAUSAU, WI 54401
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 7
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 A04
- Issued
- Aug 9, 2019
- Abate by
- Sep 16, 2019
- Penalty
- Initial $5,636 · Current $3,945 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: a) On or about 3/26/2019, HELI lift truck was equipped with 8' forks and ID tag was not changed to show the modification with the forks or other attachments that had been added which could cause a tip over hazard for the operator.
Recent events (2)
- — I (S) $3945.2
- — Z (S) $5636
1910.178 L01 II
- Issued
- Aug 9, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck a) On or about 3/26/2019, Lift truck operator interviewed had not received any training from the company.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.176 B
- Issued
- Aug 9, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard: a) On or about 3/26/2019, there were 4 sections of pallet racking that were not in compliance with ANSI standard MH16.1-2012 which requires free standing racks to be bolted to the floor in order to avoid struck by or crushing injuries to employees passing by. Racks had been on site for approximately one month and had not yet been secured.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.219 C04 I
- Issued
- Aug 9, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: a) On or about 3/26/2019, Roll former had an unguarded projecting shaft end where the fan was missing that was not smooth and projected more then half the diameter of the shaft.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 B01 I
- Issued
- Aug 9, 2019
- Abate by
- Sep 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: a) On or about3/26/2019, No grommet was provided to protect the electrical cord going into the electrical cabinet for the roll former or knockout plug for the unused opening in the box.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Southern Stretch Forming
View Southern Stretch Forming's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343880795.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.