BROOKLYN, NY —
OSHA Inspection: R & S CONSTRUCTION OF NY LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of R & S CONSTRUCTION OF NY LLC in 969 57TH ST., BROOKLYN, NY 11219 (NAICS 236116). OSHA activity number 343882361.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- R & S CONSTRUCTION OF NY LLC
- Site address
- 969 57TH ST.
- City
- BROOKLYN
- State
- NY
- ZIP
- 11219
- Mailing
- 2 ALLEN ST. STE 4H, NEW YORK, NY 10002
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236116
- Employees
- 2
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.300 B01
- Issued
- Jul 19, 2019
- Abate by
- Jul 26, 2019
- Penalty
- Initial $3,789 · Current $2,834 Reduced
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: a) Basement: Employees used an electric powered angle grinder to cut metal exhaust ducts to install them for boilers. The angle grinder was designed to accommodate a guard for the cutting wheel, and was not equipped with such guard when in use. On or about 03/26/19.
Recent events (2)
- — I (S) $2834
- — Z (S) $3789
1926.404 B01 I
- Issued
- Jul 19, 2019
- Abate by
- Jul 26, 2019
- Penalty
- Initial $3,789 · Current $2,834 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. a) Basement: Employees used an angle grinder to cut exhaust ducts and a demolition hammer to break concrete walls. The electric powered tools were connected to extension cords, which were routed to a nearby outlet device and were not provided with a ground fault circuit interrupter. On or about 03/26/19.
Recent events (2)
- — I (S) $2834
- — Z (S) $3789
1926.404 F06
- Issued
- Jul 19, 2019
- Penalty
- Initial $3,789 · Current $2,832 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous. a) Basement: Employees used an angle grinder to cut exhaust ducts. The grinder was connected to an extension cord, which was routed to a nearby outlet device and was missing a ground pin. On or about 03/26/19.
Recent events (2)
- — I (S) $2832
- — Z (S) $3789
More inspections at R & S Construction of NY LLC
View R & S Construction of NY LLC's full OSHA safety record →
More inspections in this industry (NAICS 236116)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343882361.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.