CHICAGO, IL —
OSHA Inspection: HECTOR GARCIA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HECTOR GARCIA in 3018 W. NORTH AVE., CHICAGO, IL 60647 (NAICS 238320). OSHA activity number 343882791.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HECTOR GARCIA
- Site address
- 3018 W. NORTH AVE.
- City
- CHICAGO
- State
- IL
- ZIP
- 60647
- Mailing
- 3309 W. BEACH AVE., CHICAGO, IL 60651
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238320
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.20 B01
- Issued
- May 28, 2019
- Abate by
- Jul 15, 2019
- Penalty
- Initial $1,705 · Current $597 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part. a. On or about March 27, 2019, at the above addressed jobsite, the employer did not maintain an accident prevention program to comply with the regulations of this part which included, but were not limited to, employee protection when exposed to hazards related to construction.
Recent events (2)
- — I (S) $596.7
- — Z (S) $1705
1926.454 A
- Issued
- May 28, 2019
- Abate by
- Jul 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a. On or about March 27, 2019, at the above addressed jobsite, employees conducting painting operations from a tubular welded from scaffold were not trained to recognize the hazards associated with scaffolding. The employees were thereby exposed to the hazards associated with falls.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.503 A01
- Issued
- May 28, 2019
- Abate by
- Jul 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards. a. On or about March 27, 2019, at the above addressed jobsite, employees conducting painting operations were not provided training on how to minimize fall protection hazards, thereby exposing employees to the hazards associated with falls.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 B01
- Issued
- May 28, 2019
- Abate by
- Jun 7, 2019
- Penalty
- Initial $3,978 · Current $1,392 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports such that the space between adjacent units, and the space between the platform and the uprights is no more than 1 inch wide. a. On or about March 27, 2019, at the above addressed jobsite, employees were exposed to falls while performing painting operations from a tubular welded frame scaffold, thirty (30') feet above the ground, that did not have the working level fully planked.
Recent events (2)
- — I (S) $1392.3
- — Z (S) $3978
1926.451 G04 I
- Issued
- May 28, 2019
- Abate by
- Jun 7, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms before being released for use by employees other than erection/dismantling crews: a. On or about March 27, 2019, at the above addressed jobsite, employees conducting painting operations from a tubular welded framed scaffold, thirty (30') feet above the ground, were exposed to fall hazards due to the lack of a guardrail system, at the end of the outrigger platform.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B01
- Issued
- May 28, 2019
- Abate by
- Jun 7, 2019
- Penalty
- Initial $2,273 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed. a. On or about March 27, 2019, at the above addressed jobsite, the portable ladder used to access the scaffold did not extend at least three (3') feet above the upper landing surface, thereby exposing employees to the hazards associated with falls.
Recent events (2)
- — I (S) $0
- — Z (S) $2273
More inspections at Hector Garcia
View Hector Garcia's full OSHA safety record →
More inspections in this industry (NAICS 238320)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343882791.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.