Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: LASARGE MARINE, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of LASARGE MARINE, INC. in 2110 HALLS MILL RD, MOBILE, AL 36606 (NAICS 336611). OSHA activity number 343900882.

Watch Lasarge Marine, INC. — free Get an email when a new federal OSHA severe-injury report for Lasarge Marine, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2110 HALLS MILL RD
City
MOBILE
State
AL
ZIP
36606
Mailing
2110 HALLS MILL RD, MOBILE, AL 36606
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336611
Employees
8
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $2273.00 · Current $1500.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards of being struck by fragments of Polyvinyl Chloride (PVC) plastic pipe in the event that the PVC plastic pipe ruptured:    a) fabrication area; On or about April 2, 2019 and prior the employer exposed his employees to the hazard of being struck by fragments of Polyvinyl Chloride (PVC) plastic pipe in the event that the PVC plastic pipe ruptured. PVC plastic piping was used in exposed above ground locations to transport compressed air at 120 psi.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2273

1910.134 C01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1705.00 · Current $1500.00 Reduced
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  a) painting and spraying area; on or about April 2, 2019 and times prior, the employer did not implement a Respiratory Protection Program for those employees required to wear respirators. The employees are exposed to, but not limited to, paints, thinners, gel coats, hardeners, and epoxies.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $1705

1910.213 C01

Serious Gravity 5 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $1932.00 · Current $800.00 Reduced
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  a) fabrication area; on or about April 2, 2019 and times prior, the employer did not provide a self adjusting hood to guard the blade of the table saw exposing employees to amputation hazards.
Recent events (2)
  • — I (S) $800
  • — Z (S) $1932

1910.132 D02

Other-than-serious 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed:  a) Facility; on April 2, 2019 and times prior the employer failed to document a hazard assessment of the site.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343900882.