MOUNT KISCO, NY ·
OSHA Inspection: NAIL STONE CONTRACTING, INC.
Programmed Related inspection · Safety discipline
At a glance
On , OSHA opened a programmed Related safety inspection of NAIL STONE CONTRACTING, INC. in 3 E. MAIN ST., MOUNT KISCO, NY 10549 (NAICS 238130). OSHA activity number 343908000.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NAIL STONE CONTRACTING, INC.
- Site address
- 3 E. MAIN ST.
- City
- MOUNT KISCO
- State
- NY
- ZIP
- 10549
- Mailing
- 99 WASHINGTON AVE., N WHITE PLAINS, NY 10603
What kind of inspection was it?
- Inspection type
- Programmed Related (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 7
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.454 A
- Issued
- Sep 24, 2019
- Abate by
- Oct 21, 2019
- Penalty
- Initial $3,978 · Current $3,978
General-duty citation text
29 CFR 1926.454(a): The employer shall have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: Location: entire site On or about: 4/4/19 a) Employees were using a Genie Z-60 aerial lift to access the roof. One of the employees was not provided with aerial lift safety training. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- · Z (S) $3978
1926.503 A01
- Issued
- Sep 24, 2019
- Abate by
- Oct 21, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: location: throughout site on or about: 4/4/19 a) An employee, exposed to a fall hazard while engaged in carpentry work, was not provided with fall protection training. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- · Z (S) $0
1926.453 B02 V
- Issued
- Sep 24, 2019
- Penalty
- Initial $2,842 · Current $2,842
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift: Location: beside exterior of the building, southwest corner On or about: 4/4/19 a) Employees were using a Genie Z-60 aerial lift to access the roof. The employees were not tied off using a body belt or harness. The employees were exposed to a fall of 18'6". NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (1)
- · Z (S) $2842
1926.501 B01
- Issued
- Sep 24, 2019
- Penalty
- Initial $26,520 · Current $26,520
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: Location: main roof, southwest corner On or about: 4/4/19 a) Employees, engaged in carpentry work, were not provided with fall protection. The employees were exposed to a fall of 18"6". NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (1)
- · Z (W) $26520
More inspections in this industry (NAICS 238130)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343908000.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.