Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: GULF COAST CARPENTRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GULF COAST CARPENTRY, INC. in 29201 NORTH BAYSHORE DR., ORANGE BEACH, AL 36561 (NAICS 238130). OSHA activity number 343951737.

Watch Gulf Coast Carpentry, INC. — free Get an email when a new federal OSHA severe-injury report for Gulf Coast Carpentry, INC. is published. One employer, no account, unsubscribe in one click.
Site address
29201 NORTH BAYSHORE DR.
City
ORANGE BEACH
State
AL
ZIP
36561
Mailing
P.O. BOX 2283, ORANGE BEACH, AL 36561
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2273.00 · Current $2273.00
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees exposed to struck-by and crush-by hazards:  a)  At 29201 North Bayshore Dr., Orange Beach, Alabama:  On or about April 23, 2019 and at times prior; the employer failed to require employees operating a powered industrial truck (Lull) on site to wear a seat belt during operations exposing his employees to struck-by and crush-by hazards.
Recent events (1)
  • — Z (S) $2273

1926.102 A01

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $2273.00 · Current $2273.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents:  a)  At 29201 North Bayshore Dr., Orange Beach, Alabama:  On or about April 23, 2019 and at times prior; the employer allowed his employees to operate pneumatic nail guns without eye protection while performing framing activities exposing his employees to struck-by hazards.
Recent events (1)
  • — Z (S) $2273

1926.501 B13

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3410.00 · Current $3410.00
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a)  At 29201 North Bayshore Dr., Orange Beach, Alabama:  On or about April 23, 2019 and at times prior; the employer allowed his employees to perform framing activities without fall protection exposing his employees to a fall hazard of 11.3 feet to the ground below.
Recent events (1)
  • — Z (S) $3410

1926.602 D

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $3410.00 · Current $3410.00
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l):Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178:    a)  At 29201 North Bayshore Dr., Orange Beach, Alabama:  On or about April 23, 2019 and at times prior; the employer allowed his employees to operate a Powered Industrial Truck (Lull) on site without first ensuring the employee was trained and certified to operate the Lull exposing his employees to struck-by hazards.
Recent events (1)
  • — Z (S) $3410

View GULF COAST CARPENTRY, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343951737.