LEBANON, OH —
OSHA Inspection: HINES ROOFING, LTD
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HINES ROOFING, LTD in 124 EAST STREET, LEBANON, OH 45036 (NAICS 238160). OSHA activity number 343956256.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HINES ROOFING, LTD
- Site address
- 124 EAST STREET
- City
- LEBANON
- State
- OH
- ZIP
- 45036
- Mailing
- 280 EAST PEKIN RD., LEBANON, OH 45036
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.20 B02
- Issued
- May 16, 2019
- Abate by
- Jul 3, 2019
- Penalty
- Initial $3,978 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers. On April 24, 2019, located on throughout of a residential roof, employees were installing shingles onto a steep pitch roof as there were no frequent and regular inspections being performed by a competent person to ensure the job-site, materials and equipment such as residential fall protection systems and/or devices were being maintained and utilized in a safe condition. Potential fall height measured to be 17-7". Roof pitch measured to be 10 in 12. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $2000
- — Z (S) $3978
1926.501 B13
- Issued
- May 16, 2019
- Penalty
- Initial $3,978 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502. Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems. On April 24, 2019, located throughout a residential roof, employees were exposed to a fall hazard while installing shingles onto a steep pitch roof not utilizing any fall protection system. Potential fall height was measured to be 17'-7" with a roof pitch of 10/12.
Recent events (2)
- — I (S) $0
- — Z (S) $3978
1926.503 A01
- Issued
- May 16, 2019
- Abate by
- Jul 3, 2019
- Penalty
- Initial $3,978 · Current $0 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. On April 24, 2019, located throughout a residential roof structure, employees were installing shingles on a steep pitch roof while not utilizing any fall protection system and had not been trained by the employer to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards. Employees were exposed to a potential fall height of greater than 17 feet above the ground below with a roof pitch measured to be 10/12. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $0
- — Z (S) $3978
More inspections at Hines Roofing, LTD
View Hines Roofing, LTD's full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343956256.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.