Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MIELE MANUFACTURING, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MIELE MANUFACTURING, INC. in 535 EAST THIRD STREET, WILLIAMSPORT, PA 17701 (NAICS 423910). OSHA activity number 343979852.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Miele Manufacturing, INC. — free Get an email when a new federal OSHA severe-injury report for Miele Manufacturing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
535 EAST THIRD STREET
City
WILLIAMSPORT
State
PA
ZIP
17701
Mailing
535 EAST THIRD STREET, WILLIAMSPORT, PA 17701
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423910
Employees
23
Ownership type
A

4 citations on file for this inspection.

1910.242 A

Serious Gravity 5 1 instance 5 exposed
Issued
Jun 27, 2019
Abate by
Jul 17, 2019
Penalty
Initial $4,546 · Current $3,182 Reduced
29 CFR 1910.242(a): Hand and portable powered tools or equipment were not kept in safe condition:  a) Cabinet Department, 535 East Third Street, Williamsport, PA - Employees used a Dewalt 1/2" VSR Drill Model DW235G (Serial No. 442673) without the auxiliary handle in place to drill holes in wood, exposing employees to severe injuries to their face, arms, and hands from hazards such as but not limited to drill kickback and rotating parts, on or about April 24, 2019.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (S) $3182.2
  • — Z (S) $4546

1904.40 A

Other-than-serious 1 instance 23 exposed
Issued
Jun 27, 2019
Abate by
Jul 17, 2019
Penalty
Initial $758 · Current $531 Reduced
29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within the four business hours:  a) Facility, 535 East Third Street, Williamsport, PA - The employer failed to provide copies of the injury and illness records to an authorized representative within four (4) business hours after the initial request on April 24, 2019.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (O) $530.6
  • — Z (O) $758

1910.305 G01 IV A

Other-than-serious 1 instance 5 exposed
Issued
Jun 27, 2019
Abate by
Jul 17, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure.  a) Cabinet Department, 535 East Third Street, Williamsport, PA - Employees used a flexible cord above the Kreg Table to power powered hand tools such as but not limited to Dewalt 1/2" VSR Drill Model DW235G, exposing employees to a contact with an electrical current hazard, on or about April 24, 2019.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.305 G01 IV B

Other-than-serious 1 instance 5 exposed
Issued
Jun 27, 2019
Abate by
Jul 17, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and/or cables were run through holes in walls, ceilings, or floors:  a) Cabinet Department, 535 East Third Street, Williamsport, PA - Employees used a flexible cord that ran through the drop ceiling above the Kreg Table to provide electricity for powered hand tools such as but not limited to a Dewalt 1/2" VSR Drill Model DW235G exposing employees to a contact with an electrical current hazard, on or about April 24, 2019.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343979852.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.