Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: RICK FEENEY HOMES INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RICK FEENEY HOMES INC. in MCKNIGHT ST. AND ROCKINGHAM DR., NORMAL, IL 61761 (NAICS 238130). OSHA activity number 343995460.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rick Feeney Homes INC. for free Get an email when a new federal OSHA severe-injury report for Rick Feeney Homes INC. is published. One employer, no account, unsubscribe in one click.
Site address
MCKNIGHT ST. AND ROCKINGHAM DR.
City
NORMAL
State
IL
ZIP
61761
Mailing
1705 EIDE RD., BLOOMINGTON, IL 61704
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
2
Ownership type
A

10 citations on file for this inspection.

1926.20 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $2,842 · Current $1,705 Reduced
29 CFR 1926.20(b)(1): The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:     On or about May 8, 2019, an employee was exposed to eye injuries while operating a pneumatic nailer and the employer did not have a Safety and Health Program to address areas such as, but not limited to, eye protection.
Recent events (2)
  • · I (S) $1705
  • · Z (S) $2842

1926.20 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  On or about May 8, 2019, an employee was exposed eye injuries while operating a pneumatic nailer and the employer did not ensure frequent and regular inspections of the site were performed by a competent person.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles:  On or about May 8, 2019, an employee was exposed to eye injuries while operating a pneumatic nailer and the employer did not ensure the use of proper eye protection.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.451 C02 V

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $2,273 · Current $1,364 Reduced
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms where the entire platform was not attached to the fork:      On or about May 8, 2019, an employee was exposed to fall hazards while working from an elevated work platform resting on the forks of a JLG Sky Trak Model 8042 Rough Terrain Forklift and the employer did not ensure the work platform was attached to the forks of the forklift.
Recent events (2)
  • · I (S) $1364
  • · Z (S) $2273

1926.451 F07

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered by experienced and trained employees under the supervision of a competent person:           On or about May 8, 2019, an employee was exposed to fall hazards while working from an elevated work platform resting on the forks of a JLG Sky Trak Model 8042 Rough Terrain Forklift and the employer did not ensure a competent person verified the work platform was attached to the forks prior to the moving of the elevated work platform with the forklift.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.454 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.454(b)(1): The employer did not have each employee who is involved in erecting, disassembling, moving, operating, maintaining, or inspecting a scaffold trained by a competent person to recognize the hazards associated with the work in question:          On or about May 8, 2019, an employee was exposed to fall hazards while working from an elevated work platform resting on the forks of a JLG Sky Trak Model 8042 Rough Terrain Forklift and the employer did not ensure a competent person trained the employee in the requirement to attach the elevated work platform to the forks.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.501 B11

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $2,842 · Current $1,705 Reduced
29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:    On or about May 8, 2019, employees were exposed to fall hazards of 10.7 feet to the ground below while working on a steep pitch roof to install fascia board and the employer did not ensure a suitable fall protection system was used.
Recent events (2)
  • · I (S) $1705
  • · Z (S) $2842

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  On or about May 8, 2019, employees were exposed to fall hazards of 10.7 to the ground below while working on a steep pitch roof to install fascia board and each employee was not trained on the procedures to be followed to minimize the fall hazards.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.1053 B06

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $2,842 · Current $1,705 Reduced
29 CFR 1926.1053(b)(6): Unsecured ladder(s) were used on surfaces that were not stable and level:    On or about May 8, 2019, employees were exposed to fall hazards of 10.7 feet to the ground below while accessing a roof with a portable ladder and the employer did not ensure the portable ladder was placed on a stable surface or secured to prevent movement.
Recent events (2)
  • · I (S) $1705
  • · Z (S) $2842

1926.1060 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 6, 2019
Abate by
Oct 7, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.1060(a)(1): The employer did not provide a training program for each employee using ladders as necessary, enabling each employee to recognize hazards related to ladders and the procedures to be followed to minimize these hazards:  On or about May 8, 2019, employees were exposed to fall hazards of 10.7 feet while accessing and exiting a roof via an extension ladder and the employer did not provide construction safety training in hazard recognition related to ladders.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343995460.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.